| From | Message |
creapstar
Dodge Dakota
JOIN HERE
5/26/2003
05:49:27
|
 Subject: pics of homade cold air intake for 3.9
IP: Logged
Message:
I just wanted to see some examples of a homade cold air intake for my 98' 3.9 dakota before I get started..If you have or know where I can see any please let me know..thanks
|
Andy
Dodge Dakota
JOIN HERE
5/26/2003
15:23:01
|  RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
http://photos.yahoo.com/andreas_pfenninger
under 'Dakota Tech' there are two pics of my current intake... got it as a set off ebay.
|
mpil1
GenIII
5/26/2003
18:40:43
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
I wouldn't exactly call this thing a "cold-air" intake, but its home brewed and works! (not to mention sounds kinda nice @2500 RPM and up)
Mpil's Air Cleanerz
Mpil1
'02 SXT CC, 3.9L, 5-spd, 4x4, Trac-Loc
|
98daksport
Dodge Dakota
JOIN HERE
5/26/2003
22:51:28
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
what did you use for piping
|
mpil1
GenIII
5/26/2003
23:06:53
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
3" Black ABS drainage pipe and a 45° elbow. I used Fernco Drain couplers to make the connections.
Mpil1
'02 SXT CC, 3.9L, 5-spd, 4x4, Trac-Loc
|
creapstar
Dodge Dakota
JOIN HERE
5/27/2003
03:54:30
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
What part number K&N did you use ?
|
mpil1
GenIII
5/27/2003
16:35:16
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
RE-0810. Only problem I have with that is that it has a rubber inlet. If you can find one with a plastic inlet, it would be better. Mine works, but something about the rubber inlet to me seems like its gonna come loose from that fernco some time. But, it hasn't yet for 9 months, and thats after some pretty bumpy rides!!
Mpil1
'02 SXT CC, 3.9L, 5-spd, 4x4, Trac-Loc
|
J and J Auto
Dodge Dakota
JOIN HERE
5/27/2003
22:45:18
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
I grab cold air right off the hood through a scoop
and blow it down a 14X3 K&N Exstream top the
reason I have the rest open is I have plugs
that I put in when it rains or snows here.
Than I just draw inside air have removed plastic
piece in front of origanal intake tube you can
tell the differance when they are in.
Put a temp sensor with radio shack thermometer
under air cleanner and it drops the temp from
120 to out side air temp so I know this works.
I am also stroked custom cam and ASE Chip
Larry
J&J Auto
F&B 48mm Throttle Body
Ram Air Hood K&N filter
All Amsoil Synthetics
TansGo shift kit
3.55 Sure Grip
TPS Volts .72
Injctor sync +3
1.7 crower rollers
#19 FMS Injectors
running 93 oct fuel
180 Mopar Themostat
electric fan
No Cat
JBA headers
Dynomax 17748
2 1/2 factory tail pipe
MSD6a ignition
MSD SS Blaster coil
Jet stage 2 Chip
Also have ECU with ASE Chip
MSD 8.5 super conductor wires
Autolite 3923 (gap .050 with MSD)
Borg Warner brass incerts cap and rotor
Relocated Crank sensor 5 degrees advanced
(fabricated mount)on replacement unit can do
Dual IAT's (depending on outside temp)
(cab mounted switch either manifold or Grill mount)
And More
|
John 93 Dak
Dodge Dakota
JOIN HERE
5/28/2003
12:18:57
|  RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
mpil1
Any heat problems with the ABS Drainage tubing used in your home brew intake?
|
Troy
Dodge Dakota
JOIN HERE
5/28/2003
18:15:47
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
http://www.cardomain.com/member_pages/view_page.pl?page_id=340525&page=2
Try this this type of intake. It sucks in true cold air. Only thing is that you have to cut a 3 inch hole in the metal.
|
mpil1
GenIII
5/28/2003
19:38:29
| RE: pics of homade cold air intake for 3.9
IP: Logged
Message:
John 93, I haven't had any problems as of yet. Thats some heavy duty stuff, I doubt I'll see any problems. I installed it in September of last year, so It has yet to see the dog days of summer. We'll see how that goes soon!!!!
Mpil1
'02 SXT CC, 3.9L, 5-spd, 4x4, Trac-Loc
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
