| From | Message |
Red00Sport
Dodge Dakota
JOIN HERE
5/15/2003
22:03:03
|
 Subject: Bumper grill insert
IP: Logged
Message:
After alot of searching, I still can't find the best way to put on a custom grill on the lower valance w/out taking the bumper off. I saw someone said velcro, or glue or something, just wondering if anyone else had thought of anything. Thanks
|
BadAssDak
Dodge Dakota
JOIN HERE
5/16/2003
00:23:35
| RE: Bumper grill insert
IP: Logged
Message:
Hey. I just took a drill with the smallest bit I could find and drilled a hole through each side of the up and down plastic pieces of the bumper. then I took a twisty-tie and stripped the coating of of it and threaded it through the holes and then twisted ends which went through the insert. I did that 3 times, one for each vertical plastic piece.
|
par4golf
Dodge Dakota
JOIN HERE
5/16/2003
09:19:56
| RE: Bumper grill insert
IP: Logged
Message:
in a past post where DarkFury shows how he made a custom grill using gutter guard mesh you will see where one of the replies modified his original install for the lower valace using two three foot pieces of metal strapping and attaching the mesh to the metal bars that where screwed into the back of the valance using the existing screws there.
hope that helps.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
