| From | Message |
dodge360
Dodge Dakota
JOIN HERE
5/09/2003
11:36:25
|
 Subject: 4.7 to a 5.9 with a 5-speed
IP: Logged
Message:
is it posable to put a 5.9 in place of a 3.9 and have the 5.9 a 5-speed?
|
dodge360
Dodge Dakota
JOIN HERE
5/09/2003
13:23:57
|  RE: 4.7 to a 5.9 with a 5-speed
IP: Logged
Message:
i made a type-o- on the first massage sorry.
what i ment is that is it posable to a 4.7L v8 converson with a 5.9L v8 witha chevy or dodge trans that is a 5-speed and will fit on the 360?
|
Kracker
Dodge Dakota
JOIN HERE
5/10/2003
01:53:01
| RE: 4.7 to a 5.9 with a 5-speed
IP: Logged
Message:
i doubt a gm trans would bolt to a chrysler motor...
---Kracker
|
juniorgreen
Dodge Dakota
JOIN HERE
10/13/2009
21:47:47
| RE: 4.7 to a 5.9 with a 5-speed
IP: Logged
Message:
i have a 01 durango with 4.7 will the 5.9 bolt up in replace of the 4.7 ???
|
Almost
Dodge Dakota
JOIN HERE
10/14/2009
11:56:32
| RE: 4.7 to a 5.9 with a 5-speed
IP: Logged
Message:
a record, 6 y 5 mos. And a Durango question to boot.
|
wow
Dodge Dakota
JOIN HERE
10/14/2009
15:30:06
| RE: 4.7 to a 5.9 with a 5-speed
IP: Logged
Message:
4.7 has a different bellhousing bolt pattern. You will need the 5.9 trans along with the engine. Best bet is to find a rollover/storm damage vehicle and swap everything from the rad to the driveshafts.That way, you get all the small parts you will need..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
