pbxr
GenIII
5/08/2003
06:50:02
|  RE: muffler install
IP: Logged
Message:
Not hard to do at all. I think I spent a little over an 1 and a half, removing the old, and mounting the new. As far as fit, on my 01 dak, the muffler has 2 1/2 inlets and outlets, center in, offset out. I reused my stock tailpipe to utilize the stock welded hangers for easier installation. Measure your stock muffler length wise, and try to find a comparable size. I think my dynomax was 2 or 3 inches shorter than the stock, easy fix was a 2.5 sleeve approx. 2 inches in length. The hardest part was removing the old setup, other than that, piece of cake with a few beer chasers. Good luck
'01 Sport Auto 3.9, CC, 3923s, Intense Cold Intake, Dynomax SuperTurbo 17748, Wal-Mart special roll on bedliner, MOOG upper and lower ball joints
|
Subject: muffler install