| From | Message |
kacivic
Dodge Dakota
JOIN HERE
4/23/2003
14:25:29
|
 Subject: higher displacement V6
IP: Logged
Message:
i understand that the 5.9 and 5.2 have basically the same block, and that the 3.9 is essentially a 5.2 w/ 2 cylindars missing. my question is whether it would be possible to have the 3.9 bored out and use stock-size parts for a 5.9. Also, should this be possible, would that require some work on the heads to match the block?
|
waterpolo
GenIII
4/23/2003
15:57:32
| RE: higher displacement V6
IP: Logged
Message:
You could always just pull it out and stroke it.....But really, they sell a stroker kit for the 3.9 from the information i got from the company who sells it; one its very expensive (about 2500 if i remember correctly) and two it strokes it out to a 4.7 He had no word on power numbers for it.
|
kacivic
Dodge Dakota
JOIN HERE
4/23/2003
19:05:45
| RE: higher displacement V6
IP: Logged
Message:
what company sells this, and where can i get info. about it?
just curious mostly
|
waterpolo
GenIII
4/23/2003
19:59:44
| RE: higher displacement V6
IP: Logged
Message:
Heres one site that i know off hand http://www.strokerkits.com Theres another site that is looking into develpoing a 3.9 stroker but its going to be a couple of months.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
