| From | Message |
DakSLT2000
Dodge Dakota
JOIN HERE
4/06/2003
14:39:38
|
 Subject: V6 emblems
IP: Logged
Message:
If I wanted to remove my V6 magnum emblems how would I do it. Just pry them off? Will there be holes? Any info would be appreaciated, thanks.
|
Digital
Dodge Dakota
JOIN HERE
4/06/2003
14:56:17
| RE: V6 emblems
IP: Logged
Message:
you'd have 2 hole approx 1/8" and a $hit load of sticky tape to get off. pop the hood and you will see the 2 rods that keep the emblem attached. if you want to remove it, just pry it off, personal opinion though, it's better to leave it on so that when you beat a v8 they can see that their ass was handed to them on a v6
Digital Dreamer
1999 3.9L dakota ext cab
airaid CAI/Throttle body spacer/Stage 2 jet chip/MSD blaster coil/8.5mm ignition wires/platinum 2 plugs/gauges/altezza lights
|
roby333
Dodge Dakota
JOIN HERE
4/06/2003
20:54:31
| RE: V6 emblems
IP: Logged
Message:
hey if you rip those off id be interested in buying them
|
joe_himself
Dodge Dakota
JOIN HERE
4/06/2003
22:12:41
| RE: V6 emblems
IP: Logged
Message:
hey roby333, ill take mine off if you want a set.. email me at red97kota@hotmail.com
joe_himself
|
00dak
Dodge Dakota
JOIN HERE
4/06/2003
22:42:07
| RE: V6 emblems
IP: Logged
Message:
I would take mine off in a heart beat if I didn't have to worry about the 4 holes that would be in my truck.......no if any of you know a way to fix the holes so they wouldnt look bad, sure I would sell them. Dirt cheap.
|
spitz
Dodge Dakota
JOIN HERE
4/08/2003
01:01:13
| RE: V6 emblems
IP: Logged
Message:
hey digital did your stage 2 jet chip do you any good? i hear they don't
|
Xendak
Dodge Dakota
JOIN HERE
4/08/2003
12:17:27
| RE: V6 emblems
IP: Logged
Message:
The best and easiest way to take off the emblems is to use a hair dryer. Just get it nice and hot and pry it off with your fingers. Than get some goo gone and wipe the rest of the tape off. The holes are not that noticeable if your dak is a dark color.
|
wildcatz
Dodge Dakota
JOIN HERE
4/08/2003
15:17:38
| RE: V6 emblems
IP: Logged
Message:
another way is to spray WD-40 on it and then use the butt end of a mcdonalds platic knife and wiggle that around underneath it, i should come right off
|
canadak
Dodge Dakota
JOIN HERE
4/08/2003
20:59:51
| RE: V6 emblems
IP: Logged
Message:
just so you know i took mine off and had some decals custom made.i then used a 3m two sided tape to cover up the holes and put the decal on it.it looks great and looks like it's emblem.you have to put a hard backing on it or you'll blow through it at the car wash.it has survived a canadian winter and a years worth of weather so it has lasted well.the best part is it was 35 bucks and nobody wants to race me now.(4x4+v6=hay wagon performance)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
