From | Message |
Dirkota Dodge Dakota JOIN HERE
3/20/2003 20:49:27
|
Subject: Back speakers on 4x2 2000 help IP: Logged
Message: I don't see any screws on the back speakers? can anybody give me an idea of how to remove the back speaks on a 2000 4X2? Thanks
|
00dak Dodge Dakota JOIN HERE
3/20/2003 22:18:58
| RE: Back speakers on 4x2 2000 help IP: Logged
Message: Get a flash light and look closer! These things do not just hold themselves up by magic. This is from a dealership not from some bend me over shop. There will generally be four screws holding the thing in with 2 wires in the back that go into a connecter.
|
Greg555 Dodge Dakota JOIN HERE
3/20/2003 22:26:54
| RE: Back speakers on 4x2 2000 help IP: Logged
Message: jsut pull the paneling off. can't take it all the
way due to the seat belt but jsut pull the
panneling. its all snaps in. no screws or
anything. i have a 00 reg cab. i jsut disconected
mine cause i blew them out. hope this helps
Greg
|
ccman Dodge Dakota JOIN HERE
3/21/2003 09:26:15
| RE: Back speakers on 4x2 2000 help IP: Logged
Message: yes, that is all you do. just pull the panel off. you will have to take your sill plates off too. when you get the panel off, the speaker is screwed to the panel. watch the goey black stuff when you pull the weatherstripping, it is hard as hell to get off your fabric if you get it on.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|