Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
15:01:20 - 12/29/2024

V6 Dakotas
FromMessage
runamonk
Dodge Dakota
JOIN HERE
 Email

3/02/2003
19:45:25

Subject: Replacement fog lights
IP: Logged

Message:
Howdy,

We (my fiance and I) purchased a 2003, dodge dakota sxt club cab.

We just got the basic model, (AC, 3.9L V6, Hauling package, but no fog lamps, power windows or locks).

Now for the real question, what do people recommend for the replacement fog lamps after I cutout the placeholders in the bumper?

I was looking at the Hella high powered driving lights. (http://www.stylinconcepts.com/parts.cfm/partfamilyid/45/CategoryID/26/SubCategoryID/166)

Anyone have any good recommendations? Am I going to need a special wiring harness or kit?

Thanks,

Ron Hines
rh@moirai.net



second2n0ne
Dodge Dakota
JOIN HERE
 Email

3/03/2003
10:46:55

RE: Replacement fog lights
IP: Logged

Message:
Congrats on the purchase! The Hella lights you are considering look hella good. The stock fog lights on my 2000 dak are 4-4.5" (don't quote me on this) diameter and the Hella's you are considering are 3.5"...if you haven't cut out the holes yet, you may be able to retrofit the Hella's. The problem you may encounter with this is trying to find a solid place to mount the lights. Ideally, you'll need to mount the lights on a metal body part. Check out the aftermarket fog lights Pilot makes specifically for our Daks. I have a pair and they are nice...55W H3 halogen. They bolt nicely onto the metal bumper thingy and come with a wiring harness, switch, and relay...the factory wiring is not there if you did not purchase the factory fog lights.



brianl
GenIII
 Email User Profile


3/03/2003
13:19:12

RE: Replacement fog lights
IP: Logged

Message:
I have the pilot lights in mine and they work great! Here is the link:
http://www.pilotautomotive.com/pilot2be.htm

They bolt right up. I modified mine a little and drilled through the frame and bolted the lights on through the frame rather than their method, which seemed kinda flimsy to me.

1998 4x4 Ext. Cab, 5-speed V6, Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, Prothane bushings, Bosch Platinum IV, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 31" Wrangler MTR, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads

runamonk
Dodge Dakota
JOIN HERE
 Email

3/03/2003
16:17:13

RE: Replacement fog lights
IP: Logged

Message:
Ah sweet. The replacements from Pilot look damn nice. That's exactly what I want. I was thinking of grabbing some others that were exactly 4" in diameter but I think I'll get those.

So far I have seen about 10 suggestions from others all over these forums for the pilot brand.

Thanks guys!

-r



runamonk
Dodge Dakota
JOIN HERE
 Email

3/06/2003
21:34:57

RE: Replacement fog lights
IP: Logged

Message:
Welp I ordered the Pilot lights, I should have them next week! :)

Thanks guys for all the tips!



brianl
GenIII
 Email User Profile


3/07/2003
08:04:03

RE: Replacement fog lights
IP: Logged

Message:
cool...enjoy! Let me know if you need any assitance with the install.

1998 4x4 Ext. Cab, 5-speed V6, Dynomax UltraFlo, V8 TB, Alpine 6-disc, 180 T-Stat, Prothane bushings, Bosch Platinum IV, homemade intake, Rancho RS9000, Tonneau, Herculiner Sprayed-In, 31" Wrangler MTR, MOOG Balljoints and Ties, Powerslots w/ Raybestos PG pads

runamonk
Dodge Dakota
JOIN HERE
 Email

3/12/2003
13:21:28

RE: Replacement fog lights
IP: Logged

Message:
I got my new lights today, they just arrived. Total cost with shipping and handling was 80 bucks, not too shabby and they come with great installation instructions.

Should be very simple. :) If I have any questions, I'll be sure to post them here.



runamonk
Dodge Dakota
JOIN HERE
 Email

3/16/2003
12:32:50

RE: Replacement fog lights
IP: Logged

Message:
I put them in yesterday, fantastic lights. Pulled off the lower front valance ( four bolts, so damn easy ). Drilled the holes, mounted the lights and was done. Very simple installation.

I think I am going to replace the plastic valance with something different, possibly one with a chrome finish. Not sure yet, still looking for ideas though.

Thanks for all the tips guys.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.