| From | Message |
justin
Dodge Dakota
JOIN HERE
2/25/2003
16:59:15
|
 Subject: rocker arms
IP: Logged
Message:
im lookin into some rocker arms, 1.7 to be exact. has anyone put these in and tell me the pros and cons of them and also recomend a brand .
thanks
|
DakotaDan
*GenIII*
2/25/2003
17:23:26
|  RE: rocker arms
IP: Logged
Message:
1. Yes
2. More power at 2500+ rpm, won't hurt the low end TQ
3. Will hit the stock valve covers, need to modify them.
4. Crower
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
JknPA
Dodge Dakota
JOIN HERE
2/25/2003
17:45:13
|  RE: rocker arms
IP: Logged
Message:
Dan......... A man of few words.
* Walking on Water...... does ICE count???
John.....
|
justin
Dodge Dakota
JOIN HERE
2/25/2003
19:57:18
| RE: rocker arms
IP: Logged
Message:
is there a good site to get them and what is the price?
|
DakotaDan
*GenIII*
2/25/2003
20:02:36
| RE: rocker arms
IP: Logged
Message:
http://www.socaldakota.com/frame.htm
http://www.crower.com/cat/domestic/chrysler/truck_valvetrain.shtml
Dan
Next Time You Think You're Perfect
~~~~~Try Walking On Water~~~~~
|
rtdkota
R/T
2/25/2003
20:02:59
| RE: rocker arms
IP: Logged
Message:
I sell 'em... www.socaldakota.com I believe I sell more than anyone else.
Standard kit is for applications below 5500 rpm--- or if you rev it up there-- get the kit with longer pushrods/guideplates (it's good insurance to go with the 'rev kit' if you do take it up even near 5500-- You can also upgrade to it at a later time-- so you have choices either way.
All prices are on my website (orders placed on RT Tuesday = $10.00 off and a free Crower T-shirt)
Sam
RTDKOTA
|
Gaylord
Dodge Dakota
JOIN HERE
2/25/2003
20:06:35
|  RE: rocker arms
IP: Logged
Message:
Get em here
http://www.socaldakota.com
|
justin
Dodge Dakota
JOIN HERE
2/25/2003
23:35:35
| RE: rocker arms
IP: Logged
Message:
thanks for the info guys!
|
TheSync
Dodge Dakota
JOIN HERE
2/25/2003
23:36:15
| RE: rocker arms
IP: Logged
Message:
Peter also walked on water......he wasn't perfect
|
Pistolero
Dodge Dakota
JOIN HERE
2/26/2003
15:20:39
| RE: rocker arms
IP: Logged
Message:
No, Peter wasn't perfect, and when he started to doubt what he was doing, he fell in...
The Crower rockers are stainless steel. I don't know for a fact, but I've heard other posters say that aluminum rockers will "work harden" over time, and may break after they've been on for 40 or 50K. Stainless is heavier, though, and may limit rpm's more, if you're worried about that. I'm not, so I bought the Crowers.
|
JKnPA
Dodge Dakota
JOIN HERE
2/26/2003
15:45:12
| RE: rocker arms
IP: Logged
Message:
Pistolero...... You are correct. I can walk on Ice, but not "Water'......... whatever.
Justin...... this website shows you the installation of 'roller rockers', in case you haven't seen it. Jon did a good job......
Jon........... Thanks
http://fast4x4.net/
John........
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
