| From | Message |
Brian Maier
Dodge Dakota
JOIN HERE
1/29/2003
19:30:53
|
 Subject: tubing from airhat to valvecover
IP: Logged
Message:
anyone know what kind of tubing that is and where i can get some? I have build a homebrew intake and mine is too short to reach the new airhat.
Thanks
Brian
|
Lesley
GenIII
1/29/2003
22:02:34
| RE: tubing from airhat to valvecover
IP: Logged
Message:
Just plug the hole in air hat with a rubber grommet, and put one of those little crankcase K&N filters on the valve cover. They look better than the rubber hose.
97 3.9 CC Sport. JBA stainless headers, Borla Turbo XL stainless muffler & tip, 17 x10 Boyd Coddington Smoothies, FMS injectors, V8 TB, Quick D intake, Have: 5.9 litre 360, posi, 3.92s, Ordered:M1, 52mm billet TB, ceramic JBAs.
, KRC cam, mopar perf valve covers & air cleaner
|
Brian Maier
Dodge Dakota
JOIN HERE
1/29/2003
22:12:39
| RE: tubing from airhat to valvecover
IP: Logged
Message:
Cool, i have always wanted one of those but now that i have a excuse to get one i didnt think of it. hahaha
Thanks Lesley
Brian
|
Brian Maier
Dodge Dakota
JOIN HERE
1/29/2003
22:52:16
| RE: tubing from airhat to valvecover
IP: Logged
Message:
ive been looking into those breathers and most say not for emisson controled vehicles. Will it cause it to fail the visual and or sniffer test?
Brian
1994 3.9l 2WD Ext Cab Dodge Dakota
JBA headers, JBA 8mm wires, Borg Warner Select Cap & Rotor, Autolite 3923, MSD 6A, Accel Super Coil, K&N FIPK, Hi-Flow Catalytic Converter, Flomaster Muffler, Robertshaw 180 T-Stat, V8 TB Modified, S-Bolt
|
Lesley
GenIII
1/30/2003
09:48:10
| RE: tubing from airhat to valvecover
IP: Logged
Message:
I passed without any problems. I'm in Ontario, our
emissions are pretty strict. Mine is actually one of
those APC breathers which are cheaper than the ones
from K&N.
97 3.9 CC Sport. JBA stainless headers, Borla Turbo XL stainless muffler & tip, 17 x10 Boyd Coddington Smoothies, FMS injectors, V8 TB, Quick D intake, Have: 5.9 litre 360, posi, 3.92s, Ordered:M1, 52mm billet TB, ceramic JBAs.
, KRC cam, mopar perf valve covers & air cleaner
|
IntenseDak39
*GenIII*
1/30/2003
10:16:26
| RE: tubing from airhat to valvecover
IP: Logged
Message:
They arent emissions legal but wont affect the sniffer test. If you look at it.. that valve cover grommet is used to get fresh air to the crankcase (the other valve cover pulls the air out via pcv). It used that tube to get air from your intake system and all you do is shorten the distance to get fresh air by putting that filter on top of the valve cover. So it is still functioning the same. Most places over look them and when i got an inspection the inspector said "you're really no suppose to have that but its okay with me"
...but dont take that statement to the bank and blame me if you might not get passed.
Turbocharged V6
|
waterpolo
GenIII
1/30/2003
13:54:12
| RE: tubing from airhat to valvecover
IP: Logged
Message:
whats the part number you all have for the valve cover filter? Also will it fit a stock valve cover?
Thanks for the help,
Alex
|
IntenseDak39
*GenIII*
1/30/2003
14:16:05
| RE: tubing from airhat to valvecover
IP: Logged
Message:
i have the little K&N breather filter on mine... unsure of part number but they make a big one and a little one. It cost me like $14
Turbocharged V6
|
waterpolo
GenIII
1/30/2003
16:08:26
| RE: tubing from airhat to valvecover
IP: Logged
Message:
IntenseDak39 -- sweet, thanks for the info, i'll go to my local auto store and see if i can locate one.
Alex
|
rev. walt
Dodge Dakota
JOIN HERE
2/02/2003
20:57:32
|  RE: tubing from airhat to valvecover
IP: Logged
Message:
i just used a mr. gasket breather for a sm block chevy. theyre about $4.00 at the local parts house
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
