From | Message |
Jim Dodge Dakota JOIN HERE
1/13/2003 23:58:33
|
Subject: V-6 Performance Parts IP: Logged
Message: I have a 93 Dakota Sport with the 3.9 V-6. I have put the Flowmaster Series 40 Duals on and your basic K&N Filter for little power gains. I was wondering if anyone knew if there is a performance cam for the 3.9 V-6. I have looked but haven't see one, does anybody know if there is one? I am looking to get some more power out of the engine, or is there any other mods that can be done to the 3.9 at a modest cost. Thank you.
|
Todd W GenIII
1/14/2003 04:23:25
| RE: V-6 Performance Parts IP: Logged
Message: Do you have dual mufflers, or a Flowmaster 40 with dual outs? If it's dual mufflers, your loosing so much backpressure that your negating any gains.
|
Chip B. Dodge Dakota JOIN HERE
1/14/2003 04:48:46
| RE: V-6 Performance Parts IP: Logged
Message: Todd, I beg to differ. The stock "cat foward" system creates enough back pressure that even if you sawed the exhaust off after the cat, bottom end torque would only suffer a little and higher rpm power would improve slightly...well in therory, anyway.
|
Chip B. Dodge Dakota JOIN HERE
1/14/2003 05:33:01
| RE: V-6 Performance Parts IP: Logged
Message: Jimbo, read back throughout this message board for stuff like relocating the AIT senser, V8 throttle body swapping, getting cooler air to that K&N, 1.7 rocker arms, 3.91 gears, synthetic lubricants in every thing, 60psi in your tires, removing weight..etc..etc..etc..
|
stealwings582 GenIII
1/14/2003 10:41:14
| RE: V-6 Performance Parts IP: Logged
Message: 60 psi in your tires? I wouldn't recommend that to anyone unless you have some kind of farm tractor tires on your truck.
Wouldn't want any other!
|
Neil Dodge Dakota JOIN HERE
1/14/2003 15:36:20
| RE: V-6 Performance Parts IP: Logged
Message: speedtweaks has a cam
|
Trouble Dodge Dakota JOIN HERE
1/14/2003 21:05:13
| RE: V-6 Performance Parts IP: Logged
Message: start with the basics.....
v8 throttle body and maybe an intenseperformance intake.
|
Jim Dodge Dakota JOIN HERE
1/14/2003 23:17:18
| RE: V-6 Performance Parts IP: Logged
Message: I have Flowmaster 40 with dual outs after the converter.
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|