From | Message |
Kaveman Dodge Dakota JOIN HERE
12/29/2002 01:00:03
|
Subject: Do I need a lift to get 2inches IP: Logged
Message: I got a 2003 4x2 dakota and I want to raise the front end 2 inches. Someone was telling me that I dont need a lift kit, and that I can make some adjustments to the suspension and then have it realinged? Anyone done this or have a idea?
|
Jay Dodge Dakota JOIN HERE
12/29/2002 09:01:27
| RE: Do I need a lift to get 2inches IP: Logged
Message: I had a 1991 Nissan 2wd that i lowered about 2inhes in the front. I had a truck shop lower the torshin (my spelling sucks here but it sounds like tore-shin) bars on both sides and got a reallignment, and short shocks. The truck drove fine after that. It was cheap Tooooo!
|
Jon Dodge Dakota JOIN HERE
12/29/2002 10:52:29
| RE: Do I need a lift to get 2inches IP: Logged
Message: Yeah you can crank up the torsion bars a little to make it sit higher in the front. I know on most fullsize trucks you can crank them up 2 inches without a problem, i'm not sure about the dakota though.
-Jon
|
93dakman Dodge Dakota JOIN HERE
12/30/2002 00:32:17
| RE: Do I need a lift to get 2inches IP: Logged
Message: u have a 2wd it doesnt have torsion bars
you have coil springs
the only way to lift your 2wd is to put taller spring on it or put coil spacers from a company like daystar
|
PopGenie Dodge Dakota JOIN HERE
12/30/2002 06:32:48
| RE: Do I need a lift to get 2inches IP: Logged
Message: The other alternative is to get a body lift kit. Prices for these for ONLY the kit is about 225-250 USD. Unfortunately there are no suspension lift kits for the 2WD Dakotas due to the differences in the front suspension from the 4WD. At least that's the story I got from our local 4WD parts center...
Mike T.
01 CC 6A 2WD
|
justa4x2 Dodge Dakota JOIN HERE
12/30/2002 16:53:46
| RE: Do I need a lift to get 2inches IP: Logged
Message: fabtech.com
2" coils or a 3" package with 3" coils and rear blocks/shackles
i have a bodylift and its a great way to get a raise with a low budget
shutup perverts
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|