| From | Message |
Karen
Dodge Dakota
12/09/2001
10:26:31
|
 Subject: Idle Sensor
IP: Logged
Message:
I am trying to locate the idle sensor on my 95 Dodge Dakota V6. Can someone tell me where it is located. I have removed the intake cover but I do not see it..assuming I know what I would be looking for. I just paid a thousand bucks to have my kids car fixed and now my truck has stopped. My ex (mechanic) said it is most likely the idle sensor) so I am trying to find it to replace it myself. The truck starts and runs but if you let off the accelerator, it immediately stops running.
|
CW
GenIII
12/09/2001
11:02:06
|  RE: Idle Sensor
IP: Logged
Message:
It is on the back side of the throttle body. Black round cylinder about 1.5 in ches long with four wires going to it. Before you spend the money try place it try cleaning it. Look at www.speedtweaks.net under the tips and tricks section. It is under how to cean your throttle body and how to clean your IAC motor which is what you are talking about.
2001 4.7 5sp 3.92 LSD sport plus
Ported throttle body, IAT adjuster, flowmaster cat back, adjusted TPS from .51v to .76v, 4" cold air intake
|
Knobbyman
GenIII
12/09/2001
11:17:25
|  RE: Idle Sensor
IP: Logged
Message:
Thanks CW I thought she'd find someone on this board to help her out.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
CW
GenIII
12/09/2001
11:42:35
| RE: Idle Sensor
IP: Logged
Message:
No prob. I have to proof read my posts a little better. That one was bad.
2001 4.7 5sp 3.92 LSD sport plus
Ported throttle body, IAT adjuster, flowmaster cat back, adjusted TPS from .51v to .76v, 4" cold air intake
|
Knobbyman
GenIII
12/09/2001
11:47:07
| RE: Idle Sensor
IP: Logged
Message:
LoL.. I'm sure no one cares as long as the correct info is there.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
Karen
Dodge Dakota
12/10/2001
09:48:39
| RE: Idle Sensor
IP: Logged
Message:
Thanks for everyone's help. But alas, the tow truck cometh. I couldnt get the old one off myself so I am having the repair shop rip me off. It is nice to know I have some place to come when I have a problem though. Bulletin Boards for computer help aren't nearly so nice or as helpful. The last time I asked for help on one of those they just made fun of me. Thanks all and Merry Christmas.
|
Knobbyman
GenIII
12/10/2001
11:12:44
| RE: Idle Sensor
IP: Logged
Message:
I'm sorry it didn't work out. Perhaps we can help you out next time.
Yes this is a great place with ALOT!!! of information and if none of us know.. Our intrest usually gets perked up just enough for us to help scrounge up the information.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
