| From | Message |
Metalgreendak
Dodge Dakota
JOIN HERE
12/05/2002
21:24:04
|
 Subject: Hey all 87" carbed dakotas
IP: Logged
Message:
Hey I was looking in my V6 engines bok tonight and I came acros something that you guys might like I am gonna check into this further but if you can't get the M1 4 barrel intake MOPAR makes a 4 barrel adapter for 2 barrel intakes the part # is P4876513. I think putting on a small 4 barrel could give some extra power over the 6280 so hope this helps.
Metalgreendak
87 dak 4x4 , carbed 3.9, 2.94 suregrip rear, white, shortbed, reg cab, 198,xxx miles
97 dak 2x4, x-cab, 3.9
|
Metalgreendak
Dodge Dakota
JOIN HERE
12/05/2002
21:26:49
|  RE: Hey all 87
IP: Logged
Message:
Oh ya and its $21.75 from Mopar
|
mmm3
Dodge Dakota
JOIN HERE
12/06/2002
17:13:36
| RE: Hey all 87
IP: Logged
Message:
87 carbed 3.9 have a rv cam, i don't think more cfm would make any diff. can you get more than 4000 rpm out of yours ?, i don't know anyone yet that can
|
Jeff
Dodge Dakota
JOIN HERE
9/29/2003
11:59:51
| RE: Hey all 87
IP: Logged
Message:
Has anyone used this carb adaptor yet? If so what set up?
|
Jeff
Dodge Dakota
JOIN HERE
10/09/2003
17:23:29
| RE: Hey all 87
IP: Logged
Message:
Hey just got that intake adapter yesterday and put it on my 87 dakota. bolted up my 600cfm eldebrock4 barrel, and it fired right up!! RUNS GREAT!!! it doesn't seem like the secondaries are opening up but at this point I really don't care it runs better then ever!! only cost me 23 bucks from the local dodge dealer. I can't believe it I thought I'd have to buy a 340 dollar carb.
I would have never even known this was an option if it wasn't for this board ! you guys are great.
|
Metalgreendak
Dodge Dakota
JOIN HERE
10/09/2003
22:11:40
| RE: Hey all 87
IP: Logged
Message:
Glad to help out Jeff but mabye 600 cfm is a little bit of overkill I was thinking 350 mabye.
Metalgreendak
|
Jeff
Dodge Dakota
JOIN HERE
10/10/2003
01:37:21
| RE: Hey all 87
IP: Logged
Message:
yeah me too but I had this laying around so I posted a question titled 600cfm?? and the guy that answered me said it should be no problem. so I tried it.. and it worked! although like I said I don't believe the secondaries are opening.
all I know is its getting me to work and back untill I can really fix it
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
