| From | Message |
thirt13en
Dodge Dakota
JOIN HERE
11/28/2002
15:53:12
|
 Subject: some help with duals n a little more...
IP: Logged
Message:
ive got a dakota 2wd 6 3.9 l. im lookin to find dual exhaust that dump out right behind the rear tires. if anyone can help me out itd be greatly appreciated. im also lookin for a k&n intake for the same...maybe its just me but i cant seem to come across either of these for a 02' 3.9 oh yea...n one more thing. if anyone knows where to get a rollpan. preferably urithane[sp?] . thanks.
|
Todd W
GenIII
11/28/2002
16:23:23
|  RE: some help with duals n a little more...
IP: Logged
Message:
You should be able to make an intake off a 5.9L fit with maybe some slight modification. My Airaid intake is off a 5.2L, the extent of the modification was bending one of the supporting arms back half an inch to reach the bolt hole. Not exactly difficult stuff! You can also fabricate your own with materials from Home Depot (gotta love that place)
As for duals? Don't go full duals, the loss of backpressure will hurt your low-end torque. I've got dual -outs- on my truck, meaning it's a single into the muffler, then two 2.5" outs into 3" tips. Directly out the back under the bumper, looks sharp and doesn't sound half bad (Flowmaster 40) from outside. Inside it's a bit droney though, but I've gotten used to it. I'm still running stock exhaust forward of the muffler, from what I've heard running no-cat or a high-flow will increase my upper-end but hurt the lower-end power. Headers, also from what I've heard, don't help much since the stock manifold isn't that bad flow-wise.
Good luck on the rollpan! I haven't looked for one of those. Have you tried truckperformance.com?
|
droptopdak
Dodge Dakota
JOIN HERE
12/01/2002
22:04:55
|  RE: some help with duals n a little more...
IP: Logged
Message:
http://www.sporttruckdirect.com/sir_m.html its not urethane but it is a poll pan
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
