| From | Message |
Thomas J
Dodge Dakota
JOIN HERE
11/25/2002
22:32:09
|
 Subject: What does it take to equal a v8?
IP: Logged
Message:
OK, I know im gonna get a whole bunch of flames and stupid answers (try and make them funny at least!) But i was just wondering what mods other then supercharger and turbo would it take to make the 3.9 equal the 4.7 or 5.9.
|
Sasquatch
Dodge Dakota
JOIN HERE
11/25/2002
22:44:15
| RE: What does it take to equal a v8?
IP: Logged
Message:
Go to speedtweaks.com, Bernd has a table showing roughly the packages he has available for the 3.9 and estimated HP gains. That will give you an idea at least.
|
J.D. Leddon
Dodge Dakota
JOIN HERE
11/25/2002
23:29:01
|  RE: What does it take to equal a v8?
IP: Logged
Message:
Puttin A V8 in your truck will be equal to a V8!!
|
stealwings582
GenIII
11/26/2002
10:53:15
| RE: What does it take to equal a v8?
IP: Logged
Message:
K&N FIPK intake and somehow enclose the filter. 48 mm throttle body or v-8 throttle body conversion. Autolite plugs, msd coil and maybe the ignition box to go with it. Change the pulleys out, 1.7 rocker arms. Jet stage II chip. Transgo shift kit. JBA headers with either a Dynomax or Flowmaster exhaust. And it'll deffinately show improvement, but as far as beating V-8's, I'd say 50/50. Greg
Wouldn't want any other!
|
power hungry
Dodge Dakota
JOIN HERE
11/26/2002
13:06:20
| RE: What does it take to equal a v8?
IP: Logged
Message:
If your talking about stock 230hp I would get
1)a port job done on the heads,mill the heads to bump up the compression a little
2)a cam with a duration around 210@0.50 lift.
3)50mm throttle body
4)flash your pcm or a chip
5) normal mods (shift kit, tq converter, 3" cat-back, headers, intake, etc.)
Those mods should put past the small v8s in power.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
