| From | Message |
gary dueitt
Dodge Dakota
JOIN HERE
11/17/2002
13:09:30
|
 Subject: oil pump replacement
IP: Logged
Message:
How in the @*?$!!! can you get to the oil pump to replace it without taking out the whole motor????? I have a 2000 3.9 Quad Cab Dodge Dak with V.6 Mag.
|
frankli16
Dodge Dakota
JOIN HERE
12/10/2007
20:13:01
|  RE: oil pump replacement
IP: Logged
Message:
i have no idea but I'm trying to do the same in my piece of s--t
|
J and J Auto
GenII
12/13/2007
06:50:02
| RE: oil pump replacement
IP: Logged
Message:
take 1 or both motor mouts off jack up and
remove pan
Now go to chrysler get there performance catolog
out get the melling high volume (not high presure)
pump and a gasket the pump comes with gasket
listed for 318 same pump
Should also check drive shaft and bushing
just see if you can wigle it if you can
need puller pull old bushing and replace
Larry
J&J Auto
|
nenaw
Dodge Dakota
JOIN HERE
1/14/2013
19:29:42
| RE: oil pump replacement
IP: Logged
Message:
do you know how to get the oil pump out without taking the motor out
|
daddio
Dodge Dakota
JOIN HERE
1/15/2013
20:25:25
| RE: oil pump replacement
IP: Logged
Message:
Check the post above yours. Larry says to remove one of the
motor mounts and jack the motor up. Hello!
|
jeff grinnell
Dodge Dakota
JOIN HERE
2/18/2013
19:00:52
| RE: oil pump replacement
IP: Logged
Message:
how does one replace the oil pump driveshaft in a 5.2 1999 dodge dakota. replaced pump but oil pressure comes and goes.
|
daddio
Dodge Dakota
JOIN HERE
2/19/2013
13:36:10
| RE: oil pump replacement
IP: Logged
Message:
What exactly do you mean by "comes and goes"?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
