| From | Message |
K-Dak
Dodge Dakota
JOIN HERE
11/04/2002
11:10:13
|
 Subject: Underdrive Pulley's?????
IP: Logged
Message:
I have seen a couple posts on the Underdrive pulley's and how they work and sometimes noticeable. I just want to know the truth if it is worth the money....
02' RC 3.9L Graphite
V8 TB, Airaid Intake, 3923's, 17448 Dynomax, clear corners, carbon fiber tails, Tekstyle Soft tonneau, street scene speed grille.
Coming soon----Flame gauges, 2/4" lowering
|
kota62
Dodge Dakota
JOIN HERE
11/04/2002
11:18:44
|  RE: Underdrive Pulley's?????
IP: Logged
Message:
K-Dak:
I recently installed the crank under drive pulley, it's the last mod i've done to my engine, For $58.00 delivered to my door i felt pretty good about trying it, must say that i don't notice any obvious seat of the pants gains, but every little bit helps with our V-6's, I did notice a 1mpg increase though.... Only downside for me was a slight loss of charging amps at idle with Air, stereo and lights on, during normal driving it still charges at about 14 amps
Hope this helps with your decision
Gary
00 Dak CC V-6 Auto (42RE) 2WD
K&N Drop-in, Cold Air Intake, TPS Mod, IAT Relocate, V-8 TB, Brass Cap & Rotor, 3923’s, JBA 8mm Wires, 180° T-Stat, Clutch Fan Removed, FlowMaster Muffler, UnderDrive Crank Pulley, Lowered 2&2
|
Greg555
Dodge Dakota
JOIN HERE
11/04/2002
12:38:50
| RE: Underdrive Pulley's?????
IP: Logged
Message:
for the money you can't go wrong. its a simple mod
to do as well. takes 20 min to do. total cost will
run you around $80: $60 for the pully+shipping,
and then another $20 or so for a new belt. and you
will notice a difference. so its worth it
Greg
|
Dale
Dodge Dakota
JOIN HERE
11/04/2002
13:45:35
| RE: Underdrive Pulley's?????
IP: Logged
Message:
I noticed some off the line power. I think it was worth my money.
|
K-Dak
Dodge Dakota
JOIN HERE
11/04/2002
17:11:49
| RE: Underdrive Pulley's?????
IP: Logged
Message:
Cool thanks for the help. Also where can I get this part and should I be looking for a certain brand? Anything will help.
02' RC 3.9L Graphite
V8 TB, Airaid Intake, 3923's, 17448 Dynomax, clear corners, carbon fiber tails, Tekstyle Soft tonneau, street scene speed grille.
Coming soon----Flame gauges, 2/4" lowering
|
Jon
Dodge Dakota
JOIN HERE
11/04/2002
18:49:27
| RE: Underdrive Pulley's?????
IP: Logged
Message:
I got the 3 pulley set (can't remember the company, aps or asp or something like that). I noticed a little more power. My only complaint is that the crank pulley is a little warped, if you watch it while the truck is running it wobbles back and forth. I've had it on like that for about 5,000 miles and it hasn't caused any problems so far.
-Jon
|
BigHank
GenIII
11/04/2002
21:13:38
| RE: Underdrive Pulley's?????
IP: Logged
Message:
Jon-would that be the March 3 pulley set?
The March set I've seen is billet aluminum and looks real nice.
Do you notice any loss of charge @ idle?
MoPar to Ya!!!
|
Dale
Dodge Dakota
JOIN HERE
11/05/2002
08:59:00
| RE: Underdrive Pulley's?????
IP: Logged
Message:
aspracing.com
I have the crank only pully, I have heard probs with putting on the alt pully, and the 3 pully system sitting in traffic I have heard caused overheating probs. This is all buy from what I have read on this board.
Up to you as to what set.
I belive jetchip.com makes them also.
|
keith
Dodge Dakota
JOIN HERE
1/12/2006
13:02:40
| RE: Underdrive Pulley's?????
IP: Logged
Message:
hi, i just got a 89 dakota in mint shape for 1000 bucks after i totalled my done up 93 ranger. Its got the 3.9L, standard
im looking for a underdrive pulley for this engine, please reply back with info, thanks!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
