Forums
Forum Tools
|
 |
23:55:46 - 12/19/2024
V6 Dakotas
| From | Message |
nate
Dodge Dakota
JOIN HERE
9/30/2002
03:02:43
|
 Subject: shifter knob
IP: Logged
Message:
anybody know how to get the shifer knob off of an 02? I've got a bobble-head doll head I want to put on there for a few days as a joke, but I couldnt figure out how it comes off and didnt want to just "pull" until it did. Hell, I dont need any more broken parts on my truck.
|
MightyDakSXT
GenIII
9/30/2002
09:54:57
| RE: shifter knob
IP: Logged
Message:
You need to use a screw driver to pry the black cap off of the top. (The shift pattern is printed on the cap.) Once you remove the cap, there is a nut inside that you have to remove and then the shifter knob will come off.
2002 RC SXT, 3.9 Liter V6, 5-spd, 3.55 rear, Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, Quick D Intake, Modified V8 TB, Gibson Exhaust, Robert Shaw 180° T-stat, Custom Grille, Custom JBA 9mm Power Cables
|
RACERDY
GenIII
9/30/2002
11:49:21
| RE: shifter knob
IP: Logged
Message:
I cant take mine off. When I turn the nut the whole rod turns. I will have to put the shifter i a vise then go for it. I figure right now I dont need it off that bad.
JOHN
|
MightyDakSXT
GenIII
9/30/2002
15:27:29
| RE: shifter knob
IP: Logged
Message:
Use a strap wrench or a vice grip. I used a vice grip at the base of the shifter (I rolled back the rubber boot) and a socket for the nut. It came off just fine.
2002 RC SXT, 3.9 Liter V6, 5-spd, 3.55 rear, Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, Quick D Intake, Modified V8 TB, Gibson Exhaust, Robert Shaw 180° T-stat, Custom Grille, Custom JBA 9mm Power Cables
|
nate
Dodge Dakota
JOIN HERE
9/30/2002
17:55:36
| RE: shifter knob
IP: Logged
Message:
thanks. Mike Vick's head looks real good as a shifter knob.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
