| From | Message |
jrock817
Dodge Dakota
JOIN HERE
9/11/2002
22:46:13
|
 Subject: gears
IP: Logged
Message:
i would like to change my gears but i cannot find what size gears i must purchase or what ratio i ave stock. i have a 98 v6 4x4 sport [ackage and the round rear end not the stop sign one... i want gears but what the heck size are they? any help would be great I LOVE MY TRUCK
|
Tony
Dodge Dakota
JOIN HERE
9/11/2002
23:00:16
| RE: gears
IP: Logged
Message:
The "round one" is called the Chrysler 8.25". The gears you have now are printed on the label affixed to the inside of your glove box. It gives you a few specs. You'll see it in there. You'll either have 3.55 ratio or the 3.92. My bets are that you have 3.55, but you never know. When I finally found where to look I was very excited to see 3.92! Even though those are nice, I'm putting in 4.56 gearing front and back along with limnited slip front and back so accompany my 33" tires =) Can't wait! Hope I helped.
-Tony
|
jrock817
Dodge Dakota
JOIN HERE
9/14/2002
15:44:16
| RE: gears
IP: Logged
Message:
thank you tony... do you know if the rears are the same size as the fronts?
|
POWER HUNGRY
Dodge Dakota
JOIN HERE
9/15/2002
01:38:52
|  RE: gears
IP: Logged
Message:
Your front axle is a Dana 35.
Good sites on find gears and which ones would work best for you are:
www.reiderracing.com
www.drivetrain.com
www.ring-pinion.com
They have calculators to see what rpms you'll be turning with a certian gear and tire combo. Also the gears you will need for the front diff are a reverse profile and need to match the rears.
|
jrock817
Dodge Dakota
JOIN HERE
9/15/2002
11:18:56
| RE: gears
IP: Logged
Message:
wow thanks a lot for the info
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
