| From | Message |
MichiganDak
GenI
 
8/11/2002
20:09:01
|
 Subject: Is this my IAT Sensor?(picture)
IP: Logged
Message:
Is this my IAT Sensor?
Just double checking before I move the baby, and then my engine decides not to start.
I'm asking the experts before I get to that point. :)
http://www.theavatars.com/sensor.jpg
I cap my Dak.
|
DakotaDan
*GenIII*
8/11/2002
20:14:50
|  RE: Is this my IAT Sensor?(picture)
IP: Logged
Message:
No but your getting warm, follow the valve cover to the front and look on the intake
Dan
K&N FIPK # 57-1517 * DynoMax #17748
OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K
Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
rabbit
Dodge Dakota
JOIN HERE
8/11/2002
20:17:31
|  RE: Is this my IAT Sensor?(picture)
IP: Logged
Message:
No, that's not it. If you look to the lower right corner of your picture, there is a gray connector that plugs into the sensor that's screwed into the intake manifold. That sensor is the IAT.
|
MichiganDak
GenI
8/11/2002
21:07:46
| RE: Is this my IAT Sensor?(picture)
IP: Logged
Message:
Alrighty...I just checked (it's night now, used a flashlight), and I 'think' I found it.
I'll take another picture tomorrow, and post up again to make sure.
Thanks!
-Dan
I cap my Dak.
|
Bernd
*GenIII*
8/12/2002
08:51:45
| RE: Is this my IAT Sensor?(picture)
IP: Logged
Message:
The IAT sensor is right behind the Alternator on the #2 intake runner of the intake manifold. Brass sensor with a white-ish/grey-ish two wire connector.
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
