From | Message |
Pistolero Dodge Dakota JOIN HERE
8/01/2002 01:03:45
|
Subject: Which rear axle? IP: Logged
Message: Can anyone tell me for certain which rearend my 2002 V6 auto would have in it? I'm pretty sure that it's an 8 1/4", but I don't know who makes it. It looks almost exactly like a Dana 35, but the tag in the glove compartment says "Corporate 8" or something like that...it was dark and I didn't have my specs when I looked...;-)
|
Graphite *GenIII*
8/01/2002 08:14:36
| RE: Which rear axle? IP: Logged
Message: most likely it is a Dana.
count the bolts on the pumpkin. 12 bolts = 9 1/4. less bolts = 8 1/4.
You have the 8 1/4 if your glove box says 8.
Mine says corp 9 and I have 12 bolts
Out standing in the field (r)
|
kryp2nite Dodge Dakota JOIN HERE
8/01/2002 18:04:58
| RE: Which rear axle? IP: Logged
Message: 4 wheel drive or 2?
|
Pistolero Dodge Dakota JOIN HERE
8/01/2002 23:24:47
| RE: Which rear axle? IP: Logged
Message: kryp2nite, my truck is a 2 wheel drive RC. The diff has 10 bolt holes, so I know it's an 8 1/4" rear, but I'm not sure if it's a Dana 35...if I decide later to get 3.90 gears, I want to know beforehand which rear end I have, or does it even matter?
|
kryp2nite Dodge Dakota JOIN HERE
8/02/2002 19:58:31
| RE: Which rear axle? IP: Logged
Message: i dont think it matters, the ring and pinion manufacturer's (SP) list the gears for 1972(ithink) and later 8 1/4 rear ends
|
Tony Dodge Dakota JOIN HERE
8/02/2002 20:06:01
| RE: Which rear axle? IP: Logged
Message: Its a chrysler corp 8.25" Dana 35 is in the front of pre 2000 dakotas for 4x4's. The rear end is usually always chrysler corp 8.25" for the daks.
tony
|
SuperBee Dodge Dakota JOIN HERE
8/02/2002 21:27:42
| RE: Which rear axle? IP: Logged
Message: HOT HOT HOT rear ends
put a dana 60 back there
|
kryp2nite Dodge Dakota JOIN HERE
8/03/2002 00:06:17
| RE: Which rear axle? IP: Logged
Message: hey superbee would a dana 60 fit without any modification?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|