| From | Message |
sicminds
GenIII
7/05/2002
17:07:32
|
 Subject: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
Hello...... I NEED HELP!!!!
i have read the instructions for the
msd6a installation. I think i understand
most of it. I firgured out the easy stuff
like what cabels go to the batery and which
to my blaster 2 coil. Now, that leaves to
left. It says to go to the old coils wires.
So does this mean i splice them? And what one
is neg and what one is pos.?
also is there anything else i need to do?
like the wire thats next to the tach output?
what is that for and do i need it?
thanks!!!!
now you know thats..................
sic
|
IntenseDak39
*GenIII*
7/05/2002
18:13:06
| RE: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
you will need to cut the wires going to the coil. Then two off the msd wires hook up to the ones from the coil and the other two msd wires hood up to the wires going to the computer/ignition (originally connected to coil before cutting)
supercharged-intensedak3.9
|
sicminds
GenIII
7/05/2002
18:45:17
| RE: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
now, what about the 8.5mm wire that is connected to my stock coil? what do i do with that?
and can i take out my old stock coil?
thanks intense
now you know thats..................
sic
|
sicminds
GenIII
7/05/2002
18:52:36
| RE: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
what i have so far.....
cabels hooked up neg and pos to my batery.
2 cabels hooked up to my blaster 2 coil
and i have two left over.....
is the following correct...
I need to cut the two wires(the ones that were pluged in) that were connected to my stock coil and then connect those two cut wires to the two left over wires that run into the msd 6a.
i just dont know what i have to do with the msd 8.5mm wire that was pluged into my stock coil.
hope that cleared it up a little
now you know thats..................
sic
|
sicminds
GenIII
7/05/2002
19:05:22
| RE: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
I have answered my own questions (WHICH SUCKS)
i think i have to get a DAM adapter.
just still curious about what wire goes with
what on the stock coil
now you know thats..................
sic
|
sicminds
GenIII
7/05/2002
19:13:54
| RE: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
is this what i need
http://www.nipponpower.com/ignition/misc/msd_powertower.html
<a href = "http://www.nipponpower.com/ignition/misc/msd_powertower.html"> Click Here</a>
now you know thats..................
sic
|
IntenseDak39
*GenIII*
7/05/2002
21:36:17
| RE: help! help! Help!!!!! MSD 6a
IP: Logged
Message:
email me your email address
supercharged-intensedak3.9
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
