From | Message |
DakSport Dodge Dakota JOIN HERE
7/05/2002 10:03:56
|
Subject: TB sensors IP: Logged
Message: my question is are the sensors from the v8 tb the same as the v6? like the tps sensor? can i just leave them on and plug them in?
Thanks
|
Dale Dodge Dakota JOIN HERE
7/05/2002 11:10:51
| RE: TB sensors IP: Logged
Message: Have not done the swap myself, but from reading, I belive they are.
|
DakSport Dodge Dakota JOIN HERE
7/05/2002 11:15:48
| RE: TB sensors IP: Logged
Message: Im attempting the swap as we speak. i just checked out the numbers on them and the tps # is slightly different. Was hopping i could use that one to drill out brass inserts to do the tps mod
|
DakSport Dodge Dakota JOIN HERE
7/05/2002 11:51:47
| RE: TB sensors IP: Logged
Message: Cause its a V8 TB does that mean i use the V8 sensors? Im pretty sure ive heard people say that they just use there V6 sensors. Also can you do the TPS mod with a V8 TB?
THanks
|
DakSport Dodge Dakota JOIN HERE
7/05/2002 12:03:11
| RE: TB sensors IP: Logged
Message: Please someone answer my question. which sensors do i use. Its holding me up from getting the job done.
THanks
|
DakotaDan *GenIII*
7/05/2002 12:43:56
| RE: TB sensors IP: Logged
Message:
DakSport
I ordered my V8 TB from the dealer and it came with the TPS & IAC already mounted on the TB, all I had to ad was the MAP sensor from my V6 TB.
I've look at my Haynes Manual and it makes no indication that the sensors are different for V6 & V8 only the 2.5 has different part #'s
Make sure you reset the computer and don't touch the gas when you do, It may take your truck 2-300 miles to idle and run normal so don't get discouraged.
Now Go get that TB on .....................
Dan K&N FIPK # 57-1517 * DynoMax #17748 OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
DakSport Dodge Dakota JOIN HERE
7/05/2002 12:47:59
| RE: TB sensors IP: Logged
Message: Thanks so much DAN!!
|
DakSport Dodge Dakota JOIN HERE
7/05/2002 12:48:00
| RE: TB sensors IP: Logged
Message: Thanks so much DAN!!
|
Daksport Dodge Dakota JOIN HERE
7/05/2002 12:49:51
| RE: TB sensors IP: Logged
Message: Which one is the map sensor and which one is the IAC sensor??
THanks
|
Daksport Dodge Dakota JOIN HERE
7/05/2002 12:52:16
| RE: TB sensors IP: Logged
Message: its gotta be the long pointy one.
thanks again. here we go
|
DakotaDan *GenIII*
7/05/2002 12:53:44
| RE: TB sensors IP: Logged
Message:
I wouldn't worry about the TPS mod yet just get the TB working, You need a Digital volt meter to check it and do it right mine was at .73 v and I tried to raise it to .76 and the truck didn't run right so I had to put it back.
I have better luck if I just do one mod at a time
You did get a V8 TB Cable for a Dakota ?????
Dan K&N FIPK # 57-1517 * DynoMax #17748 OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
DakotaDan *GenIII*
7/05/2002 12:54:48
| RE: TB sensors IP: Logged
Message: The MAP is in the front
The IAC is in the back
Facing the truck
Dan K&N FIPK # 57-1517 * DynoMax #17748 OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
DakotaDan *GenIII*
7/05/2002 12:55:55
| RE: TB sensors IP: Logged
Message:
Take care with the IAC you can damage it if you handle if wrong!!!!!!!!!
Dan K&N FIPK # 57-1517 * DynoMax #17748 OEM 5.2/5.9 V8 TB #53032691AA * Crower 1.7 Roller Rockers # 73654K Factory Flares * WeatherTechs * Saddleman Low Profile Tonneau
|
daksport Dodge Dakota JOIN HERE
7/05/2002 13:15:19
| RE: TB sensors IP: Logged
Message: just got it off. checkin the numbers with the V6 sensors and they are slightly different. so u think i should just use my V6 iac and rest V8 sensors?
|
daksport Dodge Dakota JOIN HERE
7/05/2002 13:18:20
| RE: TB sensors IP: Logged
Message: and yes i do have a V8 cable. first i gotta take the V6 one off
|
DakSport Dodge Dakota JOIN HERE
7/05/2002 16:25:24
| RE: TB sensors IP: Logged
Message: Finished the install a little while ago. Looks like everything went well. Let it idle for a few minutes. anyways, thanks
|
kryp2nite Dodge Dakota JOIN HERE
7/05/2002 19:11:55
| RE: TB sensors IP: Logged
Message: if i find a V8 Tb in a junkyard that dosent come with sensors can i use the ones that are currently attached to my TB?
|
IntenseDak39 *GenIII*
7/05/2002 21:34:37
| RE: TB sensors IP: Logged
Message: yes
supercharged-intensedak3.9
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|