Forums
Forum Tools
|
 |
22:39:46 - 12/19/2024
V6 Dakotas
| From | Message |
tony
Dodge Dakota
JOIN HERE
7/03/2002
14:27:01
|
 Subject: couple of ?'s
IP: Logged
Message:
First, I want to switch to synthetic engine oil, but how do I do a safe switch? I've been told to do one quart synthetic and 3 normal and increase a quart every oil change till its full synthetic. I've also been told to let all the oil drain out. RUn 2 quarts synthetic through and jusat let it run out of the drain. Then fill her up full with synthetic and it should be fine. ANybody help?
NExt thing... I bought the auto meter trans temp gauge and it says to put it in the oil pan thourgh a hole you drill. Is this alright or is it gonna leak? JUst drill a hole and screw the sensor in or what?
LAst ?... I bought the TCI shift kit and there are 2 ways you can go with it. EIther a heavy duty setup or the street one. THe street one just gives a more definitive shift and the heavy duty one it says is for trannies that are under a lotr of stress. I off road and I was wondering if it ewould be ok to go with the street one or would it be wiser to go with the heavy duty one?
Thanks,
Tony
|
FlameRed01
Dodge Dakota
JOIN HERE
7/03/2002
16:52:44
|  RE: couple of ?'s
IP: Logged
Message:
well i dont think its gonna matter how you do a "synthetic change" just change the $hit, and what year is your truck? dont know about the auto meter gauge, i've never heard of a tci shift kit, but i know transgo shift kits work well in dakotas, do you have a link to the tci kit?
http://flame-red-dakota.2itb.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
