| From | Message |
sicminds
GenIII
6/04/2002
20:34:17
|
 Subject: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
Just wondering if should spend
$40 on the 8.0mm or $60 on the MSD 8.5's.
Right now i have either 7mm or even 6.5. will the MSD's and the new autolites 3923's(tune up time)
be a good combo for some better performence?
Also, I would like to upgrade my whole ignition setup. What all will i need? Whats the best to get?
I was thinkin about a MSD Ignition kit, but can
only fit that for 318/360 not our 239.
I mean its tune up time, might as well spend a
couple more bucks to get the better stuff.
thanks
now you know thats..................
sic
|
FlameRed01
Dodge Dakota
JOIN HERE
6/04/2002
20:47:00
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
i have the msd 6a, blaster ss, and 8.5's its a very good ignition upgrade, it didnt get any power from this but with the autolites it really smoothed out the whole powerband
http://flame-red-dakota.2itb.com
|
sicminds
GenIII
6/04/2002
20:54:59
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
IS there anything i could upgrade with
the ignition? How much did that run
you and where did ya get it.Did you
do the install your self? Sorry for
the 100 questions, i like to know what i am
getting into before i buy.
now you know thats..................
sic
|
Dakota Bob
GenII
6/04/2002
22:26:52
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
I didn't care for the JBA wires I took them off and put the mopar wires back on. I'll sell you mine for $40. if you want to try them.
Bob
94 CC 3.9 JBA Headers,19# FI,Flow Master 40s, Auto Lite Plugs, K/N Chrome Filter, 180 T Stat ,TPS Adjustment,Flometrics TB, Black Magic 150, Mopar Wires, MSD Blaster SS Coil
|
SuperBee
Dodge Dakota
JOIN HERE
6/05/2002
01:35:04
|  RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
i was also looking at a new performcae ignition coil and some autolites, im looking for some MPG
|
sicminds
GenIII
6/05/2002
14:17:55
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
So, the reason i want to know
all of this is because i am soon
to get er tuned up. Before i move
out of my house.
So far i have planned to get
new K&N filter
New Autolite 3923's
MSD 6A
MSD Blaster SS
MSD 8.5MM wires
is there anything else that i could
do to help tune er up before i go?
now you know thats..................
sic
|
sicminds
GenIII
6/05/2002
15:00:22
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
I also would like to go with
the FMS Fuel Injectors.
Not sure tho, but i am tired
of the loud tickin
now you know thats..................
sic
|
swingman
Dodge Dakota
JOIN HERE
6/05/2002
15:35:08
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
Don't forget a new brass contact cap and rotor!
|
FlameRed01
Dodge Dakota
JOIN HERE
6/05/2002
16:46:47
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
sic- the only thing that you would be uprading by getting the msd setup is wires and coil, the 6a box only amplifies the ignition signal, this wont give you power like i said, but its great for your ignition, brass cap and rotor would be a good idea too, i got my msd stuff from my local speedshop, i cant remember exact prices (didnt really care) but the coil was like $45, wires were $50, and the 6a was about $140.
http://flame-red-dakota.2itb.com
|
sicminds
GenIII
6/05/2002
16:56:34
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
what brand for those? Does it matter?
now you know thats..................
sic
|
sicminds
GenIII
6/06/2002
08:11:37
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
anybody?
now you know thats..................
sic
|
sicminds
GenIII
6/06/2002
18:42:04
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
I think i am being ignored
now you know thats..................
sic
|
FlameRed01
Dodge Dakota
JOIN HERE
6/06/2002
19:03:35
| RE: MSD 8.5 or JBA 8.0 MM?
IP: Logged
Message:
what do you mean what brand for those? im talkin about "msd"
http://flame-red-dakota.2itb.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
