| From | Message |
Colt45
Dodge Dakota
JOIN HERE
6/03/2002
02:27:07
|
 Subject: cam on a v6??
IP: Logged
Message:
does anyone know where i can find a cam for my 1999 v6?? i would really like to have one. thanx ahead of time guys
~Colt45
|
IntenseDak39
*GenIII*
6/03/2002
09:38:13
| RE: cam on a v6??
IP: Logged
Message:
krc performance
|
Colt45
Dodge Dakota
JOIN HERE
6/03/2002
21:31:56
| RE: cam on a v6??
IP: Logged
Message:
thanx for that but i have another question. all of those cams seem to have smooth idles. do you know where i can find one that has a rough idle for a v6???? thanx,
~Colt45
|
Colt45
Dodge Dakota
JOIN HERE
6/03/2002
21:32:32
| RE: cam on a v6??
IP: Logged
Message:
thanx for that but i have another question. all of those cams seem to have smooth idles. do you know where i can find one that has a rough idle for a v6???? thanx,
~Colt45
|
IntenseDak39
*GenIII*
6/03/2002
21:41:14
| RE: cam on a v6??
IP: Logged
Message:
you're not gonna get a "rough" idle with our sixes... they do make custom cams for your likings i believe
intensedak39
|
2damnslow
Dodge Dakota
JOIN HERE
6/04/2002
01:19:54
| RE: cam on a v6??
IP: Logged
Message:
a rough idle cam will not help your performance any do to the computer. the comp will try everything in its power to readjust the idle and timing so that it will run smooth which will in the end kill your performance. so no please do not get a cam that is a custom grind just to get a lopey idle the new age computer will not run well like this. unless you do away with it and do a differant on board fuel management system you may be able to hack something together from an older dodge that may allow your cam but this is alot of time spent just to get a lopey idle. not to mention a lot of money!
|
go points
Dodge Dakota
JOIN HERE
6/04/2002
07:30:04
| RE: cam on a v6??
IP: Logged
Message:
1999 1999 1999 computer ????
|
Colt45
Dodge Dakota
JOIN HERE
6/05/2002
01:21:13
| RE: cam on a v6??
IP: Logged
Message:
thanx guys I appreciate it a lot. do u know about how much it will cost to have a cam installed???
~Colt45
|
Colt45
Dodge Dakota
JOIN HERE
6/05/2002
01:21:30
| RE: cam on a v6??
IP: Logged
Message:
thanx guys I appreciate it a lot. do u know about how much it will cost to have a cam installed???
~Colt45
|
bernd
*GenIII*
6/06/2002
09:11:47
| RE: cam on a v6??
IP: Logged
Message:
Depending on the shop...anywhere from $400-$600 on labor (not including parts - oil, coolant, gaskets, etc.).
1997 Dodge Dakota SLT - V6
Supercharged/Intercooled @ 10# w/Nitrous
14.55 @ 96.01mph
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
