| From | Message |
Dale
Dodge Dakota
JOIN HERE
5/23/2002
10:22:24
|
 Subject: IAT Locator
IP: Logged
Message:
I am new to modifing my dakota due to its just now getting out of warrenty. On this IAT relocator will I lose any antifreeze doing it, do I need to put pipe dope on the threads? What does it do to my mpg?? Also does anymake a power ECM sytem for the 3.9l auto besides jetcrap? If so where and how much?? Also where can I get just the crank pully and what length belt will I need? Much Thanks
97 3.9l auto, cold air intake, duals, tb spacer, 2/3 drop, 17" rims.
|
kryp2nite
Dodge Dakota
JOIN HERE
5/23/2002
22:26:19
| RE: IAT Locator
IP: Logged
Message:
u thinking about IAt or thermostat?
|
TonyC
Dodge Dakota
JOIN HERE
5/24/2002
00:26:13
| RE: IAT Locator
IP: Logged
Message:
Summit has the ASP crank pully and it's pretty reasonable (about $60). Works good for me.
As far as relocating the IAT, you will need a 1/4" NPT plug for the intake manifold. Just remove the IAT from the manifold, replace it with the 1/4" plug. Then drill a hole (about 6" from the throttle body)in your cold air intake and screw the IAT into it. Should be a snug fit so no pipe dope was necessary for me.
|
dale
Dodge Dakota
JOIN HERE
5/24/2002
08:26:12
| RE: IAT Locator
IP: Logged
Message:
Thanks for the info. I did that last night with the IAT, I think its a little more then 6" away from the tb, but their was already a hole their so I tapped it out bigger. So far I havent noticed a change :( I also pulled my IAC out and cleaned it cause I had irratic idle, fixed that, and then I ran my k&n thru the dishwasher (mom n dad were gone) and cleaned it. Will check into the pully next :)
|
MightyDakSXT
GenIII
 
5/24/2002
10:55:24
| RE: IAT Locator
IP: Logged
Message:
I don't think I'd use that filter anymore.
2002 SXT, 3.9 Liter V6, RC, 5-speed, 3.55 rear
-={ Second place is the first loser.} =-
Extang Tonneau, Autolite 3923 Plugs, Borg Warner Cap & Rotor, K&N Filter, Gibson Catback Exhaust, Robert Shaw 180 Degree T-stat, Custom Grille, Modified V8 TB. Coming soon: Quick D Air Intake
|
dale
Dodge Dakota
JOIN HERE
5/24/2002
11:12:03
| RE: IAT Locator
IP: Logged
Message:
Whys that? I have done it with others, it worked fine, I just do it w/o soap, just using high pressure hot water.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
