From | Message |
frank1 Dodge Dakota JOIN HERE
11/22/2011 10:41:23
|
Subject: engine not heating up IP: Logged
Message: my 94,with a 3.9 will not heat up ,it will if i put cardboard and block off the rad. what would be the reason for this. a new 195 degree thermostat has been installed and the water pump works good, i am thinking the fan clutch .any comments i regards to what this problem might be. when i have the cardboard installed the heater works great,like it should, with cardboard removed, almost not heat.
|
daddio Dodge Dakota JOIN HERE
11/22/2011 13:30:55
| RE: engine not heating up IP: Logged
Message: Thermo stat could be stuck open. Then backflush your heater core.
|
frank1 Dodge Dakota JOIN HERE
11/23/2011 09:23:05
| RE: engine not heating up IP: Logged
Message: the thermostat has been replace twice, nothing wrong with either one, has anyone removerd the clutch fan and installed an electric fan.
|
daddio Dodge Dakota JOIN HERE
11/23/2011 10:33:06
| RE: engine not heating up IP: Logged
Message: Is the temp gauge reading low or you just do not have any heat coming from the heater?
|
frank1 Dodge Dakota JOIN HERE
11/24/2011 00:28:38
| RE: engine not heating up IP: Logged
Message: Both, but if i put cardbord in front of the rad and drive, it heats up like its supposed to with both gauge function and heat from the heater. thats why i am thinking its the fan clutch pulling air through the rad and not giving it any time to heat up.
|
drew Dodge Dakota JOIN HERE
12/08/2011 21:19:45
| RE: engine not heating up IP: Logged
Message: its not going thru your block or heads, drain the
whole system and back flush, ever use head gasket
seal?? it plugged up holes somewhere, make sure you
open the plugs in your block to drain coolant from
there too
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|