| From | Message |
Thomas J
Dodge Dakota
JOIN HERE
5/10/2002
14:01:59
|
 Subject: Wheelie
IP: Logged
Message:
is it possible? just curious =] How much
torque/hp would it take to get the front end of a
dakota to lift up =]
|
kryp2nite
Dodge Dakota
JOIN HERE
5/10/2002
19:12:06
| RE: Wheelie
IP: Logged
Message:
move the engine to the bed
then its easier
|
tony
Dodge Dakota
JOIN HERE
5/10/2002
20:10:39
| RE: Wheelie
IP: Logged
Message:
Ha... Well, funny story... I was goin to get my dual exhaust put on and I'm waiting to turn right during rush hour to the exhaust place. After like 5 min I get an opening...tiny... so i gun it. Everything was good but what i didnt notice was the lil hill into the parking lot and the bump at the top of the hill. Next thing I see is blue sky!!!! Come down, and just kept rollin forward bouncin almost run into the building and turn into a parking spot. Needless to say the muffler guys were laughing their a$$es off. As was I...
Tony
|
kryp2nite
Dodge Dakota
JOIN HERE
5/10/2002
21:09:26
| RE: Wheelie
IP: Logged
Message:
hey does any1 know how to post pics?
|
kota on 20s
GenIII
5/10/2002
21:17:43
| RE: Wheelie
IP: Logged
Message:
only way to get a v6 truck off the ground is to put some hydro's on it and hop the hell out of it
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
IntenseDak39
*GenIII*
5/10/2002
21:52:57
| RE: Wheelie
IP: Logged
Message:
you could move the motor to the back like stated earlier.. it would wheelie then
intensedak39
CLICK HERE!
|
Thomas J
Dodge Dakota
JOIN HERE
5/11/2002
14:51:29
| RE: Wheelie
IP: Logged
Message:
Sot heres no way to do it wiothout moving the engine? Alright just curious =] i know some trucks can do it with alot of mods =]
|
92dakotahd
GenII
5/11/2002
22:56:50
| RE: Wheelie
IP: Logged
Message:
Find a way to get like 500+hp and 500+lb/ft and you might do it. But that's next to impossible with a 6er.
|
SuperBee
Dodge Dakota
JOIN HERE
5/11/2002
23:31:17
| RE: Wheelie
IP: Logged
Message:
got a 1981 250 custom 12 pass van to do it, and all i needed was about 1 and a half tons of roofing shingles in the very back end
|
n8 dawg
Dodge Dakota
JOIN HERE
5/12/2002
01:38:58
| RE: Wheelie
IP: Logged
Message:
i know a guy tht can get his s-10 to pop the wheels about 4 in off the ground......sad thing is he only runs high 14's
and there is "supose" to be a dak around my town that can get his tires off the groud with a 5.2 but i wont believe it till i see it =)
|
LI Blackdak
Dodge Dakota
JOIN HERE
5/12/2002
13:50:12
| RE: Wheelie
IP: Logged
Message:
sure just supercharge it with 18 psi and run a 200 shot of NOS and it will do a wheelie and then blow up
|
SuperBee
Dodge Dakota
JOIN HERE
5/12/2002
22:57:46
| RE: Wheelie
IP: Logged
Message:
"and then blow up"
LOL
|
Montag
Dodge Dakota
JOIN HERE
5/13/2002
10:37:31
| RE: Wheelie
IP: Logged
Message:
I saw a gen2 last weekend at the track. He road a wheel stand for about 60 ft. I think he was about 3-4 ft high. He ran a 6.40 on the 1/8. I don't know what he had in it, I never got a chance to talk to him.
|
QuickRacing
Dodge Dakota
JOIN HERE
5/13/2002
11:46:00
|  RE: Wheelie
IP: Logged
Message:
Have any of you seen or heard of the "Hemi under Glass"? I had an artical on it a while back... Was build just for wheelies!! Engine in the rear!
"Quick"
|
92dakotahd
GenII
5/13/2002
13:50:25
| RE: Wheelie
IP: Logged
Message:
There's some red van truck thing too. There are variations for each automaker anymore. I think the original was a mopar. Very cool. Can't be a great ride though. Probably feels like your on the end of a hammer.
|
MoparDude340
Dodge Dakota
JOIN HERE
5/13/2002
15:39:58
| RE: Wheelie
IP: Logged
Message:
It was the Lil' Red Wagon. Another Mid engine Hemi. Back in '97 I entered in the Mopars in English Town, New Jersey and the Lil' Red Wagon and the Hemi Under Glass (Both replicas of the orignal, since they are both in museums) went down the track together both doin wheelies the whole time, both running 12's. Must be nice. :-)
Just another 3.9 Dak
|
kryp2nite
Dodge Dakota
JOIN HERE
5/13/2002
19:17:52
| RE: Wheelie
IP: Logged
Message:
196- dodge B-100 trucks had slant 6 mid engine trucks
all people had to do was drop in an eight and that could do wheelies
|
SuperBee
Dodge Dakota
JOIN HERE
5/14/2002
02:10:39
| RE: Wheelie
IP: Logged
Message:
yes, those little snub nosed b100s
those thing looked funny, they would have been better with 1 when int he front instead of 2
|
kevin smith
Dodge Dakota
JOIN HERE
5/14/2002
17:20:32
| RE: Wheelie
IP: Logged
Message:
Get the world's fattest man to sit on your
tailgate!!!!
|
Jon
Dodge Dakota
JOIN HERE
5/14/2002
20:43:29
| RE: Wheelie
IP: Logged
Message:
Get really big slicks so you get all your torque to the ground. Then stroke out your motor, supercharger it, nos it, and put really stiff shocks in the front.
-Jon
|
IntenseDak39
*GenIII*
5/14/2002
22:26:33
| RE: Wheelie
IP: Logged
Message:
nah... but the stiff ones in the back and most worn out shocks in the back... that way the front will come off the ground and the back wont squat on you.
intensedak
CLICK HERE!
|
92dakotahd
GenII
5/14/2002
23:25:23
| RE: Wheelie
IP: Logged
Message:
how do you put stiff wornout shocks on the back at the same time? Isn't that an oximoron?
|
IntenseDak39
*GenIII*
5/15/2002
00:30:07
| RE: Wheelie
IP: Logged
Message:
damnit... i meant the front...
you would want the most worn out shocks/springs in the front and the stiffest in the back.
intensedak
CLICK HERE!
|
92dakotahd
GenII
5/15/2002
08:35:50
|  RE: Wheelie
IP: Logged
Message:
IntenseDak39 I thought thats was what you meant but I was just a little confused. I wasn't trying to be stupid or anything.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
