| From | Message |
wizkid06790
Dodge Dakota
JOIN HERE
10/19/2010
18:33:34
|
 Subject: 2000 3.9 dakota stumbles and stalls
IP: Logged
Message:
I have a 2000 dakota 3.9 with no trouble codes ..put in new...and i mean new pcm....new wires cause it needed a tune up..cap rotor etc..
Now the truck tends to stumble and stall after hot...No pending or codes are present with my snapon scanner and tested fuel pressure and its ok...if you spray carb cleaner it runs fine...any suggestions guys or gals please help thanks all
|
yea
Dodge Dakota
JOIN HERE
10/19/2010
18:40:27
| RE: 2000 3.9 dakota stumbles and stalls
IP: Logged
Message:
Try cleaning the IAC and TB.
|
wizkid06790
Dodge Dakota
JOIN HERE
10/19/2010
19:06:34
| RE: 2000 3.9 dakota stumbles and stalls
IP: Logged
Message:
i remember my dakota having the same problem and i did the same thing your talking about ill try it tyty
|
yea
Dodge Dakota
JOIN HERE
10/20/2010
10:28:02
| RE: 2000 3.9 dakota stumbles and stalls
IP: Logged
Message:
Be sure to use a new TB gasket on reassembly, Their
cheap and go easy when cleaning the IAC motor.
|
wizkid06790
Dodge Dakota
JOIN HERE
10/21/2010
19:16:01
| RE: 2000 3.9 dakota stumbles and stalls
IP: Logged
Message:
finally found the problem.....took my scanner and ran some tests and found that the 02 sensor was holding back gas...but would not throw a code....unplugged it and the truck ran like new....so for 42 dollars i fixed it..just a lazy 02 sensor go figure....thanks for the input......
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
