| From | Message |
pikedriver99
Dodge Dakota
JOIN HERE
9/19/2010
21:36:59
|
 Subject: 99 4x4 3.9 p1391
IP: Logged
Message:
My truck runs fine until it warms up then it bearly idles. p1391 says manufac. ignition misfire. help please!!!
|
yea
Dodge Dakota
JOIN HERE
9/20/2010
11:44:47
| RE: 99 4x4 3.9 p1391
IP: Logged
Message:
1391 is a crank or cam sensor signal problem.
|
pikedriver99
Dodge Dakota
JOIN HERE
9/20/2010
18:35:31
| RE: 99 4x4 3.9 p1391
IP: Logged
Message:
I know where the crank sensor is but where is the cam sensor?
|
pikedriver99
Dodge Dakota
JOIN HERE
9/20/2010
18:59:44
|  RE: 99 4x4 3.9 p1391
IP: Logged
Message:
I've called all the local auto parts places and they don't show a cam sensor for my truck.
|
daddio
Dodge Dakota
JOIN HERE
9/20/2010
22:12:52
| RE: 99 4x4 3.9 p1391
IP: Logged
Message:
Cam sensor is in the distributor.
|
pikedriver99
Dodge Dakota
JOIN HERE
9/21/2010
19:45:44
|  RE: 99 4x4 3.9 p1391
IP: Logged
Message:
Thax, I guess there's no easy way to the crank sensor?
|
yea
Dodge Dakota
JOIN HERE
9/21/2010
23:20:23
| RE: 99 4x4 3.9 p1391
IP: Logged
Message:
Crank sensor is on the back of the engine.
(top passenger side, 2 allen bolts & a plug)
|
daddio
Dodge Dakota
JOIN HERE
9/22/2010
06:31:19
| RE: 99 4x4 3.9 p1391
IP: Logged
Message:
For the crank sensor removal, some say remomve the passenger side front wheel and inner fender and you can see it plain as day on the back of the engine.
On, my '00 2wd/ 5spd QC, I just crawled under there found the crank sensor and removed it without jacking anything up or removing anything else.
|
pikedriver99
Dodge Dakota
JOIN HERE
9/22/2010
19:23:14
| RE: 99 4x4 3.9 p1391
IP: Logged
Message:
I will have to pull the tire and fender well. You can't get to it from the top and the exhaust is in the way from the bottom. Thanks alot...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
