| From | Message |
Steven
Dodge Dakota
JOIN HERE
5/19/2010
16:11:30
|
 Subject: Wipers
IP: Logged
Message:
I have a 1993 v6, 2wd, automatic
When im using my wipers, i've noticed that sometimes when they go up the my driver side wiper will go beyond the windshield and off it and also sometimes they wont go all the way down after they go up. Does this mean that the wiper motor has/is going bad??
Thanks
|
NurlBalls
Dodge Dakota
JOIN HERE
5/19/2010
16:27:46
| RE: Wipers
IP: Logged
Message:
Your Knurl Balls are stripped bud..ya need new pivots balls!!
|
Steven
Dodge Dakota
JOIN HERE
5/19/2010
19:41:23
| RE: Wipers
IP: Logged
Message:
Where would i find these at because i've been checking them out online and i cant find squat. Are these called something else? Or do i need to buy a whole new wiper arm?
|
Steven
Dodge Dakota
JOIN HERE
5/19/2010
19:45:27
| RE: Wipers
IP: Logged
Message:
And im double checking, are the knurl balls are the part on the wiper arm that are at the end that actualy connect the wiper arm to the rotating part from the wiper motor?
|
Olindo
Dodge Dakota
JOIN HERE
5/19/2010
22:54:43
| RE: Wipers
IP: Logged
Message:
Some JB Weld oughta do the trick...eh? Save some $$ anyway you can.
|
Steven
Dodge Dakota
JOIN HERE
5/20/2010
06:58:48
| RE: Wipers
IP: Logged
Message:
Well im ocd when it comes to my truck and i actualy have money to put into it now and i'd like to fix the wipers properly before they fall off.
|
jared
Dodge Dakota
JOIN HERE
5/20/2010
07:33:24
| RE: Wipers
IP: Logged
Message:
I've seen this happen before. Sometimes all you have to do is tighten the nut that holds the wiper arm on. This was a common problem on GM cars from the mid 90's. It's worth a shot. Only takes a couple of seconds to put a wrench on it.
Good luck!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
