| From | Message |
Steven
Dodge Dakota
JOIN HERE
2/12/2010
14:18:07
|
 Subject: Intake manifold
IP: Logged
Message:
I need help finding a new intake manifold. I have a 93 v6 auto rwd. With it being old and a v6 that's the hard part. Has anyone replace their's? If so, where did you find it? I need to replace it because mine has a pit where the t-stat sits and leaks colant badly and i don't want to put stop-leak in it because that isn't fixing it that's just hiding the problem. I've tried the junkyard but they don't have any dakotas.
|
daddio
Dodge Dakota
JOIN HERE
2/12/2010
14:45:36
| RE: Intake manifold
IP: Logged
Message:
They did put that 3.9 in the rams also.
|
Steven
Dodge Dakota
JOIN HERE
2/12/2010
15:48:34
| RE: Intake manifold
IP: Logged
Message:
Yeah i know it's the same engine. The closest junkyard is 30 minutes away and they had only one v6 there and it was already in a thousand pieces and of course the manifold was gone. Just my luck i guess.
|
daddio
Dodge Dakota
JOIN HERE
2/12/2010
16:02:49
| RE: Intake manifold
IP: Logged
Message:
Try here: www.car-part.com
It will search salvage yards around the country and most of them accept credit cards and ship merchandise to you.
|
Relf
Dodge Dakota
JOIN HERE
2/14/2010
14:58:55
| RE: Intake manifold
IP: Logged
Message:
Yes, car-part.com is great. Used it many times.
Or you could just get some JB Weld to fill the void in your manifold.
Yeah, stopleak might not be a good idea for you.
|
Steven
Dodge Dakota
JOIN HERE
2/15/2010
10:06:46
| RE: Intake manifold
IP: Logged
Message:
Thanks guys, i'll give that a try when i get a chance
|
psssst
Dodge Dakota
JOIN HERE
2/15/2010
13:30:12
| RE: Intake manifold
IP: Logged
Message:
"They did put that 3.9 in the rams also."
& Vans
|
yogi
Dodge Dakota
JOIN HERE
2/22/2010
13:10:01
| RE: Intake manifold
IP: Logged
Message:
yup i have the 3.9 ram and dumb idea truck weighs to much for the 3.9 unless you do a lot of moding like me:)
|
Ha
Dodge Dakota
JOIN HERE
2/22/2010
13:18:27
| RE: Intake manifold
IP: Logged
Message:
Anything more then a 2 wheel drive regular cab Dak
is too much for these motors. (stock)
|
ES
Dodge Dakota
JOIN HERE
2/22/2010
15:26:32
| RE: Intake manifold
IP: Logged
Message:
You could also goto a machine shop and ask them what it would cost to fill in the pit and smooth it back down. They drill it out fill it in with weld and machine it down about 1 hours worth of work if that for any machine shop really.
|
Steven
Dodge Dakota
JOIN HERE
2/22/2010
19:21:01
| RE: Intake manifold
IP: Logged
Message:
Yeah i could try that. I would've done that by now but i can't find anyone with a tig welder, since the intake manifold is aluminum istead of steel
|
Tyler
Dodge Dakota
JOIN HERE
2/24/2010
22:04:51
| RE: Intake manifold
IP: Logged
Message:
'Anything more then a 2 wheel drive regular cab Dak
is too much for these motors. (stock)'
Even thats pushing it haha
|
jdwags
Dodge Dakota
JOIN HERE
2/27/2010
17:28:33
| RE: Intake manifold
IP: Logged
Message:
i got an extra 92 3.9 manifold, shipping from seattle is all you need?
J
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
