| From | Message |
double d
Dodge Dakota
JOIN HERE
5/06/2002
12:45:34
|
 Subject: intakes
IP: Logged
Message:
Where can i find a four barrel intake for my 3.9L 87 Dakota? E- mail me if u have any ideas. dodgeboy107@hotmail.com
|
steve
Dodge Dakota
JOIN HERE
5/10/2002
00:14:05
|  RE: intakes
IP: Logged
Message:
dude looking too ya had any luck found one a few years back . but went to order today found my speed shop ouy of bus. al ready bored .30 over , have headers ,perfomance inigition ,lifted 3 in running 33x12.50's hooking my son up he be driving it this fall had truck 12 years need to finish looking sweet.contact me lets see if we help each other contact sumu.b.sumu@verizon.net just found this sight looking promising
|
91 dakota
Dodge Dakota
JOIN HERE
5/10/2002
03:41:48
|  RE: intakes
IP: Logged
Message:
good luck guys. Dodge had Holley make their TBI's specifically for Dakota's. . . the CFM on these is over 200 somewhere, i have yet to figure out the max RPM for these trucks, so that # is a shot in the dark. I am selling mine as i am TIRED of not having money to fix it up or not finding ANYthing for this damn truck. good luck finding intakes!!!!
|
double d
Dodge Dakota
JOIN HERE
5/10/2002
11:37:41
| RE: intakes
IP: Logged
Message:
I'm in the middle of pro streeting my dak. i tore the 3.9 out and bored it .30 over, and put a little bit of a cam in it. I want to get all my sub frame and body work done, i.e. rear, tranny mounts, just the little stuff till im ready for my 360 which i'm hoping to stroke out to 408 with a solid roller cam and 10 or higher compression pistons. if you know where i can get a four barrel intake, leave me a name, and phone number of the place and where to.
|
double d
Dodge Dakota
JOIN HERE
5/10/2002
11:38:22
| RE: intakes
IP: Logged
Message:
I'm in the middle of pro streeting my dak. i tore the 3.9 out and bored it .30 over, and put a little bit of a cam in it. I want to get all my sub frame and body work done, i.e. rear, tranny mounts, just the little stuff till im ready for my 360 which i'm hoping to stroke out to 408 with a solid roller cam and 10 or higher compression pistons. if you know where i can get a four barrel intake, leave me a name, and phone number of the place and where to.
|
FazDak
GenII
5/10/2002
12:00:56
| RE: intakes
IP: Logged
Message:
Guys the original Mopar Performance part # is P4452115.
It is WAY discontinued but I have a friend that sells MP parts and he says he has heard that a few Dealers and HP parts stores have some sitting around, just need to call em all and make alot of contacts.
I gave him a whole list of premag V6 HP part #'s a while back, he was goingto see what he could round up. If he gets any of em for me I am going to seel em on here.
Hope this helped, Scott
|
91 dakota
Dodge Dakota
JOIN HERE
5/11/2002
05:15:37
| RE: intakes
IP: Logged
Message:
the number is for. . . the stock intake, 4bbl intake, upgrade recent intakes. . . etc? i am trying to talk to my dealer and get some answers on the TBI.
here are some other #'s: i have a 1991, V6 4x basically stock drivetrain: the open diff is 8.25 corporate, 75 amp alternator, not sure on the tranny (A500?), transfer case is NP 231, approx 165 hp 260 t/lbs/ft, lockup in the tranny.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
