| From | Message |
relf
Dodge Dakota
JOIN HERE
12/10/2009
19:27:34
|
 Subject: P0113, (IAT high input) question
IP: Logged
Message:
I have a code on my '98 Dak 4x4 that reads P0113, which is "IAT high input". The Haynes manual page 6-12 says to test the connector to the IAT with the ignition "on" and you should have "approximately 5.0 volts". Well, I have 5.22 volts DC, is that too high?
I am going to remove the IAT in the morning and check the resistance while immersing the sensor portion in hot water and then cool water before I spend $45. for a new one.
Any other suggestions? Thanks in advance.
relf
|
relf
Dodge Dakota
JOIN HERE
12/12/2009
02:24:43
|  RE: P0113, (IAT high input) question
IP: Logged
Message:
The sensor turned out to work fine after I cleaned the terminals. They were lightly coated in that powdery, white crap. After cleaning I applied di-electric grease and re-assembled. The "check engine" light went off after driving about 20 miles and I was able to pass my emissions test.
relf
|
Hey
Dodge Dakota
JOIN HERE
12/12/2009
15:43:50
|  RE: P0113, (IAT high input) question
IP: Logged
Message:
Glad we could help! LOL
But on a serious note glad you got it fixed and passed the sniffer test.
|
DieselYellow
Dodge Dakota
JOIN HERE
12/29/2009
19:39:28
| RE: P0113, (IAT high input) question
IP: Logged
Message:
Yellow stone diesel parts plant is one of the leading manufacturers
of engine parts, in particular diesel fuel injection system
accessories for replacement, such as Fuel injection Nozzle, Plunger and
Delivery valve, ETC In south of china .
for more detail please visit our website : www.yellowstonediesel.com
www.dieselinjection.cn
Yellow stone diesel parts plant was founded in 1997.Over the years,
Yellow stone has grown and gained a reputation for producing
high quality products and delivering them on time.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
