| From | Message |
boltonranger2
Dodge Dakota
JOIN HERE
9/17/2009
23:13:43
|
 Subject: Need to get the right TB for 3.9
IP: Logged
Message:
2002 3.9 v6
I found a 1999 5.2 TB locally for 25.
Haven't seen it so not sure what it looks like.
Some of you have posted about this mod--
will this work okay on my 3.9 or do I need the modified 48mm that I found on ebay?
It's my understanding that 48mm is good; but I've read in here where the 50mm v8 actually is choked to less than 50.
Can you shed some light on this for me?
-br
2002 Quad; 3.9 auto_4wd_180 stat_3923's_crank sensor mod_tps@.725
|
withheld
Dodge Dakota
JOIN HERE
9/18/2009
00:17:10
| RE: Need to get the right TB for 3.9
IP: Logged
Message:
"I found a 1999 5.2 TB locally for 25. "
That's a good price and that TB will work on your 02.
|
boltonranger2
Dodge Dakota
JOIN HERE
9/18/2009
01:14:46
|  RE: Need to get the right TB for 3.9
IP: Logged
Message:
Thanks for the reply!
I'll grab it up.
-br
|
J and J Auto
GenII
9/22/2009
04:20:44
| RE: Need to get the right TB for 3.9
IP: Logged
Message:
the only thing you may run into isthe cable end
may be diff
bycycle type end
ball stud end
disc type
than you just need to get the right end cable
from a bone yard and change it
use all your V6 sensors because you know there
good
start and stop engine 3 or 4 times to learn idle
than about 200 miles it will learn the new flow
and you will notice it from 1600rpm to red line
around 15 to 18 hp rear wheel gain
And yes the 5.2 and 5.9 have 50mm throttle plates
but the have what is called a torque step that
is 48mm and you do not want to mode this use as is
92 to 95 need 92 to 95 v8 body
96 up need 96 up v8 body
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
