Forums
Forum Tools
|
 |
22:50:50 - 12/19/2024
V6 Dakotas
| From | Message |
Jeff Doane
Dodge Dakota
JOIN HERE
8/20/2009
00:49:43
|
 Subject: 95 Dakota 4X4 3.9 Removal
IP: Logged
Message:
I am pulling the motor out of a 95 Dakota 4X4 with a 3.9L. Do the plates the bolt between the engine block, bell housing, and front diff. need to be removed before the engine comes out? Any help would be a great help?
Thanks
|
92dakotabasta
Dodge Dakota
JOIN HERE
8/20/2009
18:44:28
| RE: 95 Dakota 4X4 3.9 Removal
IP: Logged
Message:
i removed my V6 three times!!
third time was the charm....
after i dropped the y-pipe, i removed the exhaust manifolds.
you get to see all the god dam bolts! and that starter comes out
super quick!!
and yes, those brackets gotta come off, but support the front
differential before you remove those brackets or the diff will slip
down a bit, it may give you problems when lining up the holes on
reinstallation.
good luck!!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
