| From | Message |
davy
Gen II
 
8/03/2009
14:49:22
|
 Subject: crankcase sensor
IP: Logged
Message:
Where is the crankcase position sensor located on a 1995 Dodge Dakota with a 3.9 V6 engine, 4wd in it matters?
|
daddio
Dodge Dakota
JOIN HERE
8/03/2009
15:17:32
| RE: crankcase sensor
IP: Logged
Message:
Facing the engine, it is bolted to the block right at the bottom of the left head. Goes into the trans bellhousing. Most people with auto trans remove the passenger side inner fender to ease access to remove/ change it. On my manual 4x2, I can just slide under the truck and remove it with ease.
|
davy
Gen II
8/04/2009
04:19:18
| RE: crankcase sensor
IP: Logged
Message:
Got lucky and the crankcase sensor was OK, there was a broken wire in the wiring harness. Thanks for your help.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
