| From | Message |
KustomD
Dodge Dakota
JOIN HERE
7/17/2009
10:23:13
|
 Subject: HELP!!!! 90 Dakota 3.9 V6 EFI
IP: Logged
Message:
HELP! My dakota has died and wont fire back up... it will crank and attempt to start but is not getting any fuel to the motor, the fuel pump is fine, the fuel lines are fine, the injectors are not spraying. There is currently no power getting to the injectors, any help would be much appreciated as I don't know what else to do...
|
Mark
Forum Moderator
7/17/2009
10:34:20
| RE: HELP!!!! 90 Dakota 3.9 V6 EFI
IP: Logged
Message:
Can you test for power to the injectors? Maybe the fuel pressure regulator or a clogged fuel filter.
-Mark Hryckiewicz
1993 Sport RC SB 5.2L Auto
|
?
Dodge Dakota
JOIN HERE
7/17/2009
12:51:20
| RE: HELP!!!! 90 Dakota 3.9 V6 EFI
IP: Logged
Message:
Look for a splice in the wiring harness under the fuse/relay box ( underhood ) .
It is about 8 to 10 inches down the harness
unwrap the tape - find it- 3 or 4 wires
spliced together - redo it with good quality 'joiner' or solder and tape.
|
daddio
Dodge Dakota
JOIN HERE
7/17/2009
12:55:01
| RE: HELP!!!! 90 Dakota 3.9 V6 EFI
IP: Logged
Message:
Do you have fuel pressure at the fuel rail? As Mark suggested, check for power to the injectors.
Doesn't the Camshaft Position Sensor tell the injectors when to fire? Maybe that?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
