| From | Message |
Country
Dodge Dakota
JOIN HERE
6/08/2009
13:19:38
|
 Subject: ABS and Brake lights on in dash
IP: Logged
Message:
I recently replace my front clip for my 1990 Dakota v6. Had to take everything off the fender walls, etc and put back. All is working fine, except the ABS and Brake lights stay on on the Instrument panel. All the fuses look fine. When I start it up they go off like they are supposed to then come back on in a couple seconds. Any Idea's?
Thanks
|
Bob Lincoln
Dodge Dakota
JOIN HERE
6/09/2009
08:34:30
| RE: ABS and Brake lights on in dash
IP: Logged
Message:
Check the wiring to the brake system underhood for the brake warning light. You may have disturbed the connection to the sensor.
|
Country
Dodge Dakota
JOIN HERE
6/09/2009
09:51:38
| RE: ABS and Brake lights on in dash
IP: Logged
Message:
Thanks, but that is the obvious answer. There are a lot of wires bundeled together. There is one small grey/white wire that looked like it is supposed to go somewhere, but finding that somewhere is not easy. Will have to look more carefully. I was very exausted after pulling the front clip from the junk yard, then taking off mine and putting the new one back on. Not an easy job by yourself considering I am not an auto mechanic kind of person. I go to Jiffy Lube for my oil changes.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
