| From | Message |
well
Dodge Dakota
JOIN HERE
4/16/2009
21:19:58
|
 Subject: RE: stalls after start
IP: Logged
Message:
"i would consult a service manual."
or Larry, pretty much the same thing LOL
and to correct myself I would think if it was leaky injector it would trip a code for cyl. missfire
|
mario
Dodge Dakota
JOIN HERE
4/16/2009
23:08:02
| RE: stalls after start
IP: Logged
Message:
does anyone know how to service injectors??? i think this is what im going to do next..they all fire but its possible they could be dirty.
|
well
Dodge Dakota
JOIN HERE
4/16/2009
23:22:14
| RE: stalls after start
IP: Logged
Message:
All I've ever done was use a prestone complete fuel system cleaner and a bottle of STP injector cleaner (black bottle) together once a year
and a STP black bottle every 5000 miles
want to get a slight increase in MPG's and smoother idle a set of 5.0 - 4 hole injectors
|
I Know
Dodge Dakota
JOIN HERE
4/16/2009
23:35:32
| RE: stalls after start
IP: Logged
Message:
Did you check the fuel pump relay and ASD relay under the hood in the fuse box?
|
ecdak
Dodge Dakota
JOIN HERE
4/17/2009
04:24:21
| RE: stalls after start
IP: Logged
Message:
Both o2 sensors? That is some coin, right>? How about vacuum leak?this is a 12 year old truck. I have had old rotted hoses on my truck when it was 2 years old.
|
daddio
Dodge Dakota
JOIN HERE
4/17/2009
09:01:13
| RE: stalls after start
IP: Logged
Message:
mario, get a can of Seafoam and follow the directions on the can. that should clean the fuel system out.
somehow i doubt that's your problem. otherwise you'd be getting misire codes.
|
mario
Dodge Dakota
JOIN HERE
4/18/2009
13:00:55
| RE: stalls after start
IP: Logged
Message:
would it still throw a misfire code if was firing, but just not like its supposed too?
yeah both o2's were 160 bucks. all of my vacume hoses appear to be okay, any one i should pay special attention too?
|
ecdak
Dodge Dakota
JOIN HERE
4/18/2009
18:44:30
| RE: stalls after start
IP: Logged
Message:
maybe the ones that you cannot see. Seems like you have thrown good money after bad. Have you had a diagnostic done on it? They are only like 85 bucks or so. A quick vacuum test would be to run some propane over the lines and when you get a change in the motor your leak is in that area.
|
mario
Dodge Dakota
JOIN HERE
4/19/2009
01:44:42
| RE: stalls after start
IP: Logged
Message:
well ill tell ya what, im savin some extras cash so i can have a diag done.
i cant wait to see how it runs and what kinda gas mileage i get when i do fix the problem, sice ive replaced all throttle body sensors and o2's. once fixed she should run real nice.
|
Da Bumper
Dodge Dakota
JOIN HERE
4/24/2009
23:06:21
| RE: stalls after start
IP: Logged
Message:
Bump
|
ecdak
Dodge Dakota
JOIN HERE
4/26/2009
18:17:50
| RE: stalls after start
IP: Logged
Message:
Well we are all waiting to hear if it was fixxed.
|
mario
Dodge Dakota
JOIN HERE
4/26/2009
23:46:32
| RE: stalls after start
IP: Logged
Message:
i know, ive been trying thing after thing and i cant find it, im scheduling a diag tomorrow.
list of things ive done
iac
TPS
MAP
coil
PCV
OIL BREATHER
PLUGS
distributor cap
wires
rotors
cleaned injectors
fuel pressure checked out ok
compression checked out ok
cleaned TB top to bottom
i think i might need a new computer or have mine flashed, ive checked everything i could possibly think of and it all keeps coming back ok. i want whatever it is just to fail completely and throw a code or something.
|
mario
Dodge Dakota
JOIN HERE
4/27/2009
00:04:51
| RE: stalls after start
IP: Logged
Message:
forgot to mention the o2s also.
this problem is pissing me off beyond belief. im chasing a ghost.
|
mario
Dodge Dakota
JOIN HERE
4/28/2009
09:42:14
| RE: stalls after start
IP: Logged
Message:
alright guys, i dropped the truck off at my mechnanic yesterday. he should be calling me back soon to let me know what it is, ill tell you all as soon as i know.
|
mario
Dodge Dakota
JOIN HERE
4/29/2009
09:32:11
| RE: stalls after start
IP: Logged
Message:
i got the truck back what happend was....
as for it starting and stalling, cheap autozone iac was the fault, replaced it from napa....problem gone.
i was doing a compression test and forgot to pull the fuel pump relay while cranking the motor. so when i went to actually start it it backfired through the tail pipe and sounded like a bomb went off in my garage, it crack the insulators an all 6 plugs........so yeah, there still isnt any torque but ill be replacing the torque converter soon. thanks for all the help.
|
| | <<Original Post <<Previous Page P 2 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
