| From | Message |
chris
Dodge Dakota
JOIN HERE
12/31/2008
23:28:56
|
 Subject: 1.7 rockers
IP: Logged
Message:
i have a 95 dakota 3.9 with cold air intake, throttle body spacer, and v8 throttle body. will the 1.7roller rockers fit under stock valve covers and it wont screw anything up right? im just curious. the ratio is 1.7... right? and the studs are 3/8"... right? im going to get some from ebay and i dont wanna get screwed. thanks
|
Gears10
Dodge Dakota
JOIN HERE
1/01/2009
12:24:29
| RE: 1.7 rockers
IP: Logged
Message:
Harland Sharp 1.7 RR's fit w/o mods to the valve covers. Other brands you may need to mod the oil baffles in the v-covers
I have the HS RR's they're a great mod.
------Gears
|
got for them
Dodge Dakota
JOIN HERE
1/02/2009
21:34:36
| RE: 1.7 rockers
IP: Logged
Message:
real easy to install...2 hour job/./// just torque the down and your done.....use 20-50 oil on the rockers as a pre oil
|
J and J Auto
GenII
1/06/2009
01:09:57
| RE: 1.7 rockers
IP: Logged
Message:
Studs 5/16
pedistal is 3/4 .750
22 to 24 foot pounds
just rotate untill the valves are closed and bolt
in let it bleed down for 1/2 hour and start and
they will self adjust
it may miss a little when first started but in a
min or 2 it will be fine
a drop of blue locktight on the studs actualy they
are bolts on the harlands you will need a 1/4
allen head socket
Larry
J&J Auto
|
N56629
GenIII
1/06/2009
11:05:54
| RE: 1.7 rockers
IP: Logged
Message:
A lot of people claim that the Viper rockers are 1.7 but I have yet to actually measure them. They can be bought individually so I just have to check that out.
Anyhow, if true, they are far cheaper and apparently don't require any mod to the covers,
Check it out.
I have a set of stainless rockers and went with the baffle mod for no other reason than not having to remove the covers again if they start tapping on them. You can also find thicker valve cover gaskets that will give more clearance.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
