Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:21:27 - 12/19/2024

V6 Dakotas
FromMessage
matt
Dodge Dakota
JOIN HERE
 Email

12/09/2008
16:03:46

Subject: Master cylinder brake lines, please help
IP: Logged

Message:
I just purchased a 1996 Dakota v6 2wd.
And the master cylinder went out on me last week! While replacing the master cylinder, one of the two brake lines that comes off it and goes to the junction block rounded off.
I can't find a replacement line anywhere!
Could someone please help me out? This is my primary work truck and I’m at a total loss as to where to get this break line.
If it helps it's the line closest to the front of the radiator.
Thank you very much to anyone who




?
Dodge Dakota
JOIN HERE


12/10/2008
08:32:13

RE: Master cylinder brake lines, please help
IP: Logged

Message:
You should be able to get 'replacement brake fluid line' from any decent Auto parts store .
Just need to know what length you need .
If you do get too much , just coil it up..
Should be less than $ 5.00 for what you need..



matt
Dodge Dakota
JOIN HERE
 Email

12/10/2008
16:13:26

RE: Master cylinder brake lines, please help
IP: Logged

Message:
I went to autozone, kreggans, and pep-boys. No one had it. They had the right size tubing but not the right tubing with correct fittings.
I called a dealership and they told me to go to a junk yard... Any ideas?

thanks!



Bob Lincoln
Dodge Dakota
JOIN HERE


12/11/2008
08:13:53

RE: Master cylinder brake lines, please help
IP: Logged

Message:
I'm going through that with one line on my Dak. I bought a coil of coated PolyArmour tubing at Advance Auto, and new fittings online, and a flaring tool. I'm practicing doing double-flares on scrap line. If you don't feel confident doing this, you'll have to have it towed, have a pro make up some lines for you. Could be up to $100, parts and labor.



?
Dodge Dakota
JOIN HERE


12/11/2008
08:14:13

RE: Master cylinder brake lines, please help
IP: Logged

Message:
Then go to
www.car-part.com
-you may have to "look" for some other part
-but you will find a list of local
[ junk yards ] = pick a couple , call and
find..



matt
Dodge Dakota
JOIN HERE
 Email

12/11/2008
17:47:02

RE: Master cylinder brake lines, please help
IP: Logged

Message:
I figured id have to do the junk yard thing, lucky for me im in san diego sa there are tons of truck junk yards here...
Thanks for all the help guys!



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.