| From | Message |
Curly
Dodge Dakota
JOIN HERE
9/02/2008
15:56:13
|
 Subject: What tools, to change dist bushing &
IP: Logged
Message:
Hey guys what tools wold I need to change the dist. bushing and drive gear. Never changed one yet but I'm sure that bushing is pressed into the block pretty good.
|
Curly
Dodge Dakota
JOIN HERE
9/03/2008
12:51:36
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Nobody?
Larry, daddio, Kowolski?
I'm sure one of you guys have changed the bushings at some point. What do I need to pull the old one out? The drive gear also, Do I need any specialty tools or just the standard tool box is going to get this done?
Thanks in advance
|
daddio
Dodge Dakota
JOIN HERE
9/03/2008
14:24:57
|  RE: What tools, to change dist bushing &
IP: Logged
Message:
I am tired of answer the same questions over and over. Do a search. I am worried about being sucked up in a hurricane. No time to deal with you idiots. As soon as I roll over and wake kowalski up, we are getting out of dodge.
|
HARRY FROM CT
Dodge Dakota
JOIN HERE
9/03/2008
22:10:21
| RE: What tools, to change dist bushing &
IP: Logged
Message:
FIRST TIME I EVER SAW TORNADO WAS TONIGHT
NEVER WANT TO SEE ONE AGAIN.....MY DAKOTA IS TOTALED.......HAIL STONES ....GOLF BALL SIZED
|
daddio
Dodge Dakota
JOIN HERE
9/04/2008
12:51:13
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Curly, i have yet to change the distributor bushing. let me see if i can dig something up in a FSM on this procedure. The distributor drive gear should be as easy as removing a pin with a small punch and installing a new gear with a new drive pin. i'll post back if i get some answers for you.
as for my shadow's post above. you don't get sucked away by a hurricane. you get BLOWN away.
|
daddio
Dodge Dakota
JOIN HERE
9/04/2008
13:34:34
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Curly, shoot me an email.
|
Curly
Dodge Dakota
JOIN HERE
9/04/2008
13:48:58
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Mail sent, in case the moron tries Imping me think of Montana when you see me email addy. Thanks
|
daddio
Dodge Dakota
JOIN HERE
9/04/2008
15:30:30
|  RE: What tools, to change dist bushing &
IP: Logged
Message:
oh no you get sucked away by kowalski who is in bed with you.
|
daddio
Dodge Dakota
JOIN HERE
9/06/2008
10:21:56
| RE: What tools, to change dist bushing &
IP: Logged
Message:
curly, never got your email. there are a couple of special tools needed per the FSM. maybe someone whose done this procedure before has another way. either way, you'll of course, have to pull the distributor and the intake manifold.
|
Curly
Dodge Dakota
JOIN HERE
9/06/2008
12:38:31
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Hi daddio
Thanks, resent the mail maybe its getting blocked. If so it would be in the junk mail folder. I'm headed for a few cold ones & maybe some shots. I'll have a few for all the good guys here too, Cheers!
|
J and J Auto
GenII
9/13/2008
03:12:37
| RE: What tools, to change dist bushing &
IP: Logged
Message:
What you need is a slide hammer and the corect
end to catch the bottom of the bushing and pull
it out
The tool mopar uses is similer to a cam bearing
instal tool and than just tap it in
Its a .001 press fit
The oil pump drive and dist gear are all 1 peice
they do come out rather hard from the tarnish that
builds up on the shaft
Get a hardened drive the dist gear just a small
roll pin punch
Larry
J&J Auto
|
Curly
Dodge Dakota
JOIN HERE
9/14/2008
22:21:23
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Thank you Larry, Much appreciated.
|
Thank you
Dodge Dakota
JOIN HERE
9/15/2008
06:44:09
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Thank you Larry for clearing up the BS posted by daddio. It is nice to have you here.
|
daddio
Dodge Dakota
JOIN HERE
9/15/2008
16:00:09
| RE: What tools, to change dist bushing &
IP: Logged
Message:
hey Thank you, point out the BS.
|
Curly
Dodge Dakota
JOIN HERE
9/16/2008
07:42:13
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Daddio, Looks like you have a quite a fan there. Anyway as above I thank you for your time as well.
|
daddio
Dodge Dakota
JOIN HERE
9/16/2008
11:03:27
| RE: What tools, to change dist bushing &
IP: Logged
Message:
Curly, i believe you're right. and he rpobably couldn't even fill out an ID 10 T form.
|
J and J Auto
GenII
9/18/2008
04:57:10
| RE: What tools, to change dist bushing &
IP: Logged
Message:
If you want to replace the oil drive melling
and milodon both make hardened shafts around
$30
What I do also is when you have the gear off the
dist pull the shaft out and use some moly grease
on the shaft just a light coat
I have only run into a few trucks were the
bushing was wore usualy comes from not changing
the oil it gets some sludge built up around
the bottom under the gear and it just gets no
lubrication to the bushing I have never seen
one brake, The 302 fords I seen a few shafts
brake never in a mopar
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
