| From | Message |
ax15
Dodge Dakota
JOIN HERE
9/01/2008
12:16:56
|
 Subject: 5 speed problems
IP: Logged
Message:
ax15 a bit hard shifting and when its in 1st at a dead stop
rev the motor and the truck will creep forward with every rev
|
dakota49
Dodge Dakota
JOIN HERE
9/01/2008
18:56:06
| RE: 5 speed problems
IP: Logged
Message:
sounds like the clutch isn't fully disengaging, I would suggest you check the clutch master clynder fluid, and check for leaks, if everything looks ok, then it might be time for a new clutch. One more thing, check to see if the clutch slave cylnder bolts are tight, if they have worked loose that could cause your problem.
Good Luck
Dakota49
1988 3.9 4X4 5speed
|
ccman
Dodge Dakota
JOIN HERE
9/11/2008
23:01:44
| RE: 5 speed problems
IP: Logged
Message:
mine kinda does this but not as bad as yours. mine just won't go into first sometimes if i'm not completely stopped and sometimes hard shifting into second. Clutch fluid looks good and no leaks, tranny fluid changed as well. was thinking about changing the clutch fluid, not sure how to bleed. I have a mighty vac but not sure where to hook onto to vac.
|
J and J Auto
GenII
9/13/2008
00:18:37
| RE: 5 speed problems
IP: Logged
Message:
You can try bleeding
What happens, as the clutch wares the fingers on
the presure plate drop and the trow out needs to
move farther and farther to disenguage the clutch
At a certion point there is just not enough travel
in the throw out to fully disenguage the clutch
and hard shifting is the resault
Than the clutch needs to be replaced
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
