| From | Message |
Eric
Dodge Dakota
JOIN HERE
8/10/2008
14:43:52
|
 Subject: 3" body lift and transfer case linkage
IP: Logged
Message:
I put on the performance accesories body lift and have a 2000 dodge dakota 3.9l 5 speed 4x4, How did any of you solve the transfer case linkage problem????
|
BFH
Dodge Dakota
JOIN HERE
8/10/2008
15:31:04
| RE: 3" body lift and transfer case linkage
IP: Logged
Message:
With a hammer!
|
eric
Dodge Dakota
JOIN HERE
8/11/2008
22:19:52
| RE: 3" body lift and transfer case linkage
IP: Logged
Message:
ok so what did you do???????? you didnt lengthen anything or bend you just hit it with a hammer??
|
J and J Auto
GenII
8/17/2008
04:38:26
| RE: 3" body lift and transfer case linkage
IP: Logged
Message:
It is not nessasary to lengthen the lever the
problem is that the body will hit the lever
not alowing it to fully shift in.
what you need to do is either cut out some of the
tunnel or simply bend it over so the lever has the
travel it needs to fully inguage
some we also insaled a bigger boot
you can lengthen the lever if you want but the
same prob will exsist and if it does not shift
in fully it will pop out under load and can
damage the transfer case
Larry
J&J Auto
|
eric
Dodge Dakota
JOIN HERE
8/17/2008
19:54:21
| RE: 3" body lift and transfer case linkage
IP: Logged
Message:
thank you i will check into that.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
