| From | Message |
JimmyDean
Dodge Dakota
JOIN HERE
6/25/2008
15:20:50
|
 Subject: 99 318 in 02 v6 dak
IP: Logged
Message:
I'm swapping a '99 318 in a 2002 v6 dakota 5 speed, (Nv3500).
I've done my research and I'm pretty sure about this, but I just wanted to ask
All I need is:
1999 318 engine
1999 318 wiring harness
1999 318 4x4 5spd computer (or get it flashed)
my 2002 v6 flex plate
That's it right?
|
hmmmmmmmm
Dodge Dakota
JOIN HERE
6/25/2008
17:27:55
| RE: 99 318 in 02 v6 dak
IP: Logged
Message:
you better hope the mount bolt patterns are the same
|
JimmyDean
Dodge Dakota
JOIN HERE
6/29/2008
12:14:29
| RE: 99 318 in 02 v6 dak
IP: Logged
Message:
Are they?
|
J and J Auto
GenII
 
7/06/2008
00:10:08
| RE: 99 318 in 02 v6 dak
IP: Logged
Message:
you mean flywheel yes the same
Or you can just add the #7 & 8 injector driver
wires to your exsisting harnas
Just tap the ASD side from the injector next to
the 7 & 8 injector and than run the other side to
the V8 computer yes you need the V8 comp also
Haynes manual for around #20 will have a wire
diagram
2 comp plug pins from a comp plug from bone yard
just use a pick thin go in back wire side and hit
the little clip and they pull right out
Injector
2 wires
1 side ASD Batt volts on/off with key
other side driver from computer
Now you got it
You may need to get the vin code flashed into the
v*'s comp most charge $75 to do it
Also a piliot bushing into V8 crank if it had an
automatic behind it this suports the front
of the trans shaft
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
