| From | Message |
Guy Kelly
Dodge Dakota
JOIN HERE
4/18/2008
21:40:03
|
 Subject: motor swap
IP: Logged
Message:
Just wanting to know if anyone has any input about swapping a 94 3.9 for a 93 5.2? Would the trans line up? Do I need to move the motor mounts?Any other info would help greatly. I have a lower end knock and have to pull the motor to rebuild it or just replace it with the 5.2 Thanks for the help.
|
J and J Auto
GenII
4/18/2008
22:32:20
|  RE: motor swap
IP: Logged
Message:
Use the flex plate from the 6 and the trans and
everything else will bolt right up
How ever you will have to add the #7 and #8
injector wires to the computer plug and use a V8 computer
One side of injector is asd power on of with key
check on exsisting injector just run over to the
extra injector
other side is driver from computer must run to
computer
on the 94 it is pin 17 #7 pin 18 #8 double check
me on that a $20 haynes manual has the diagrams
Thats all you need to do to swap a v8
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
