| From | Message |
spl_kota
Dodge Dakota
JOIN HERE
3/19/2008
21:08:45
|
 Subject: throttle bodies
IP: Logged
Message:
I was looking around online yesterday for a throttle body for my 1995 Dakota 3.9 mag and visited holley.com and found that they have a high flow for 94-99 3.9s and was wondering if anyone has heard of this throttle body before and if it would be as good as a fastman or a F&B or what not. The link is:
http://www.holley.com/112-556.asp
|
daddio
Dodge Dakota
JOIN HERE
3/20/2008
08:01:19
|  RE: throttle bodies
IP: Logged
Message:
52mm is way too big for a 3.9. besides you'd have to open the bores in the manifold. either a stock V8 or the Fastman or F & B 48mm.
|
J and J Auto
GenII
3/27/2008
00:05:27
| RE: throttle bodies
IP: Logged
Message:
for your 95 any V8 318 360 92 to 95 egr type will
work 96 and up no
check the cable also may need to swap if linkage
is diff
do not mod just bolt on as is use your sensors
because you know there good start shut off 3
times and it will learn new idle
get a new gasket for a buck and a half also
low end the same gains from 1800rpm on up
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
